Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Flatbush
If your chimney is leaking, shedding brick, or venting a boiler through a stack that was built for coal, you’re in the right place. We handle chimney repair in Flatbush with an inspection-first approach: camera, photos, then a written scope. No guesswork, no pressure to reline a flue that only needs repointing.
Flatbush has a particular kind of chimney problem. The Victorian and Tudor row houses here were built with brick stacks and clay tile liners, many of which started life on coal, were patched for oil, and now serve a gas boiler. That history leaves damage that doesn’t show up when you shine a flashlight up from the firebox. Our technicians have up to 9 years of experience reading exactly that kind of stack. Call (833) 554-1032 for a free estimate.
Why Flatbush Homeowners Call Chimney Sweep Borough Park for Chimney Repair
We work as a chimney specialist, not a general contractor who sweeps on the side. That matters in a neighborhood like Flatbush, where the repair question is rarely just “clean the flue.” It’s usually “why is this crown cracking” or “why is the brick above the roofline spalling after every winter.” Our scope runs full: sweeping, inspection, cap and crown work, masonry repair, liner resurfacing with HeatShield, and full relining with DuraFlex systems. One crew, start to finish.
Flatbush homeowners also tend to ask better questions than most. They want to know the brand going into their chimney, not just the price. We install and work with trade-grade names like Gelco, Olympia Chimney, Famco and Copperfield, and we’ll tell you which one fits your stack and why. When you ask whether a liner is really necessary, we show you the camera footage and then answer.
Response into Flatbush is straightforward. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Same-day work is often possible when you call in the morning.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Flatbush
Most of the repair work we do in Flatbush falls into four areas. The common thread is water and old mortar, not fire damage.
Mortar Repointing
Original lime mortar in Flatbush chimneys gives up long before the brick does. Freeze-thaw cycles driven by coastal nor’easters work into hairline cracks, the joints recede, and the stack starts losing bricks from the top down. Repointing means cutting out the failed mortar and packing new material into the joint to the right depth, not smearing a skin over the surface. Done properly, it buys decades.

Spalling Brick Repair
Spalling is the brick face flaking off, and it’s everywhere on Flatbush’s older stacks. Once water gets behind the brick face, the freeze-thaw cycle pops it. We replace spalled units with matched brick and address the moisture source, because replacing brick without fixing the water just pushes the problem to the next course. On the Victorian rows off Flatbush Avenue, this is the single most common structural repair we recommend.

Chimney Waterproofing
A breathable waterproofing treatment on the brick above the roofline keeps bulk water out while letting the masonry dry from the inside. We don’t seal with anything that traps moisture, because a chimney that can’t breathe rots from within. Flatbush’s humid summers rust dampers and caps fast, and keeping the masonry dry slows that considerably. Done alongside repointing, waterproofing is the cheapest long-term protection you can buy for a Flatbush stack.

Flashing Repair
Most “chimney leaks” in Flatbush are flashing leaks. The metal where the stack meets the roof opens up as the roof deck and the masonry expand at different rates, and water tracks down the brick into the ceiling below. We reset or replace flashing and counterflashing with a proper reglet cut into the masonry. If the leak is really a crown problem, we’ll say so and quote that instead.
If you want the full picture of what we cover, our chimney repair page lays out the rest of the scope, including rebuilding and liner work.
Trusted Brands We Service in Flatbush
Every material we install is a trade-grade brand a certified chimney professional would specify. HeatShield for liner resurfacing when the existing flue is sound enough to restore rather than replace. DuraFlex flexible liner systems for full relining. Gelco and Olympia Chimney for component work, and Famco and Copperfield where their products fit the job. We don’t claim to stock parts locally. What we do is spec the right material for the stack, order it, and install it in one pass so you’re not waiting on a second contractor to finish the job.
Common Chimney Repair Problems We See in Flatbush Homes
- Coal-era flues venting gas boilers. A flue that looks clean from the firebox can hide decades of corrosive coal soot behind the liner. That soot eats terracotta from the inside, and the damage is invisible without a camera run up the flue.
- Cracked and spalling terracotta tiles. Original clay liners in Flatbush’s 1890s-1930s houses crack as freeze-thaw cycles work on them. Once a tile cracks, creosote and moisture get behind it and start on the brickwork.
- Crumbling crowns and joints. The lime mortar in crowns and joints erodes faster than the brick. Water gets in, rusts the damper and cap, and the cycle accelerates every winter.
- Abandoned stacks on pre-war apartment buildings. Plenty of Flatbush buildings have flues that once served fireplaces and now serve nothing, or serve a water heater. An unused flue with a failed crown is a slow water leak into the building.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Flatbush, NY
Honest numbers, so you can plan. A typical mortar repointing job on a Flatbush chimney runs $600 – $1,800 depending on height and how much of the stack is affected. Spalling brick repair runs $500 – $2,000, with the range driven by brick count and access. Chimney waterproofing runs $350 – $750 for a standard stack. Flashing repair typically runs $400 – $900. Full rebuilds and relining are quoted separately once we’ve seen the flue on camera.
What moves the price in Flatbush specifically: roof pitch and access, stack height, how far the mortar failure has spread, and whether the work needs a liner assessment at the same time. Every estimate is free, and the written estimate sets the final price. Nothing is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Flatbush
Flatbush sits close to several neighborhoods where the housing stock and the chimney problems look similar. We also work in Kensington, East Flatbush, Flatlands and Crown Heights. If you’re just over the line from Flatbush, the same inspection-first process applies. Call and tell us where you are, and we’ll book a sweep or inspection.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Flatbush
Yes. A clean-looking firebox says nothing about the flue above it. In Flatbush’s converted chimneys, the coal-era soot and failed liner sit behind the first few feet you can see, and only a camera shows that. Call (833) 554-1032 to book a Level 2 inspection with video scanning.
Those stains are efflorescence, mineral salts pushed to the surface as water moves through the brick and evaporates. It’s a sign of active moisture intrusion, usually from a failed crown, open joints or bad flashing. The fix is to find the water path, not to wash the brick. Call (833) 554-1032 for an inspection that traces the source.
Once a year, even with light use. Flatbush’s mild shoulder seasons mean sporadic burning, so creosote builds slowly and nobody notices. More importantly, a chimney venting a gas boiler needs annual inspection regardless of fireplace use. Call (833) 554-1032 and we’ll set up a yearly inspection.
Yes, and often more urgently than a fireplace chimney. Gas appliances produce acidic condensate that attacks old mortar and terracotta from the inside, and a blocked or deteriorating flue can back combustion gases into the home. Call (833) 554-1032 for a flue inspection before the heating season.
No. We show you the footage first, then the recommendation. Our technicians have up to 9 years of experience, and that experience is in reading the scan, not in talking you into work. If the chimney can safely wait another season, we’ll tell you that too. Call (833) 554-1032 for a free estimate.
Book Your Flatbush Chimney Repair
Chimney problems in Flatbush’s older houses get worse through winter, not better. A crown that’s cracking in October is a ceiling stain by February. The estimate is free, the inspection is documented, and the decision is yours once you’ve seen the evidence. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.