Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Gravesend
If you own a brick rowhouse in Gravesend, your chimney is probably doing two jobs at once: venting a gas boiler or water heater while an old fireplace flue sits capped or abandoned right beside it. That mixed setup is exactly why cap and crown work here needs a specialist who knows the difference. We handle cap installation, cap replacement, crown repair and crown coating across Gravesend, and our technicians have up to 9 years of experience reading these shared chimneys. Call (833) 554-1032 to book a free estimate.
Why Gravesend Homeowners Call Chimney Sweep Borough Park for Chimney Cap & Crown
Gravesend runs on brick. Most of the housing here is early-to-mid 20th-century one- and two-family rowhouses and semi-detached homes, and the chimneys that come with them have been retrofitted with gas heating over the decades. The original clay-tile liners now vent modern appliances, and the old fireboxes often sit unused on the same masonry chase. We understand that split, and we plan cap and crown work around both flues instead of pretending only one exists.
We’re a dedicated chimney specialist, not a general contractor who adds sweeping on the side. We work with recognized trade-grade brands – HeatShield for liner resurfacing, Famco and Olympia Chimney for caps – and we do the crown and masonry repair with the same crew, so there’s no handoff to a third party. Neighbors around Gravesend pass our number along because the work is documented and the recommendations are honest. Phone dispatch reaches Gravesend quickly, and we dispatch Sunday through Friday, 7am to 7pm, closed Saturday. We answer 24/7 if you need to leave a message about booking.
Local knowledge matters on a block like this. If a cap is seated wrong on a shared chase, the boiler flue loses draft and the problem shows up indoors, not on the roof. That’s the kind of thing we check before recommending anything.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Gravesend
Three of our services come up most often on Gravesend’s shared brick stacks: multi-flue caps, crown coating, and custom caps for odd chase sizes. Here’s how each one works when we’re on a Gravesend rowhouse.
Multi-Flue Cap Installation in Gravesend
A multi-flue cap covers both venting systems at once: the abandoned fireplace flue and the live boiler flue. On a Gravesend rowhouse this is the right answer when a single-flue cap has been sitting over a two-flue chase, choking the boiler’s draft. We size the cap so each flue vents independently, with screens that keep rain, squirrels and starlings out.

Cap Replacement in Gravesend
Old caps rust, bend, or get knocked loose by nor’easter wind-driven rain. When we replace a cap in Gravesend, we also check the cap-to-crown joint, because a poorly sealed joint lets water soak into the clay tile liner and starts spalling the brick below. Replacement is usually a half-day job on a rowhouse chimney.

Crown Repair in Gravesend
The crown is the concrete or mortar cap at the top of the chase, and on Gravesend’s older brick chimneys it’s the first thing freeze-thaw cycles break down. Cracks in a shared crown let water drip down the unused flue and rust the damper assembly. We rebuild cracked crowns with proper slope so water sheds away from the flues instead of pooling.

Crown Coating in Gravesend
When the crown is cracked but still structurally sound, a flexible crown coating can seal it without a full rebuild. On Gravesend chimneys we use a trade-grade elastomeric coating that moves with the masonry through coastal humidity and hard winters. It’s a quieter, less disruptive option for rowhouses where the crown hasn’t failed completely.
Trusted Brands We Service in Gravesend
We install and work with trade-grade chimney products: HeatShield for liner resurfacing, Famco and Olympia Chimney for caps and related components, plus Gelco and Copperfield for other chimney needs and DuraFlex for full relining when it’s called for. These are the same brands certified chimney professionals specify nationwide. We don’t claim to stock parts locally, but we can source what a Gravesend chimney needs and turn the estimate around quickly. If your rowhouse has an unusual chase width or a non-standard flue layout, a custom cap from one of these lines is often the cleanest fit.
Common Chimney Cap & Crown Problems We See in Gravesend Homes
- Crown spalling from freeze-thaw. Coastal humidity and repeated winter freeze-thaw crack the mortar crown on Gravesend’s brick chimneys. Water migrates into the abandoned fireplace flue and corrodes the damper assembly from the top down.
- Single-flue cap over a multi-flue chase. When one cap covers only half a two-flue stack, the boiler flue loses draft. That backdraft can push exhaust back into the house, and carbon monoxide is the risk nobody wants to discover the hard way.
- Failing cap-to-crown seal under nor’easter rain. A cap that’s not properly sealed at the joint lets wind-driven rain soak the clay tile liner. The result is spalling brick and, eventually, a liner that needs resurfacing.
- Abandoned and live flues confused. Homeowners here often don’t realize the old fireplace flue and the boiler flue need completely different service. One gets capped and kept dry; the other needs to vent freely.
Pricing for Chimney Cap & Crown in Gravesend, NY
Pricing is per job, set by a written estimate after we’ve looked at the chimney. Typical ranges for Gravesend:
| Service | Typical Estimate |
|---|---|
| Standard single-flue cap installation | $225 – $475 |
| Multi-flue cap (two-flue chase) | $425 – $825 |
| Custom-fabricated cap | $650 – $1,200 |
| Crown coating | $350 – $650 |
| Crown repair (rebuild) | $550 – $1,100 |
What moves the number up or down is chase height, how many flues need covering, whether the crown needs a partial rebuild, and access to the roofline. A rowhouse with one chase is a simpler job than a semi-detached home with a stepped roof. Estimates are free, and nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Gravesend
We cover Gravesend and the surrounding neighborhoods across this part of Brooklyn: Bensonhurst, Sheepshead Bay, Midwood and Dyker Heights. If you’re on the edge of Gravesend or just over in one of these areas, we can help. Call (833) 554-1032 and we’ll get you on the schedule. You can also read more about our work across Gravesend.
See the difference
Before
After
Before
After
Before
AfterThe Mixed-Flue Problem on Gravesend’s Brick Rowhouses
Here’s the local detail most chimney cap pages miss: a Gravesend rowhouse typically has a single exterior masonry chimney chase serving two completely different venting systems. One is an abandoned or capped fireplace flue. The other is a live boiler or water-heater flue venting a modern gas appliance. A cap and crown job here has to solve both at once, and a generic single-flue approach does neither well. On a typical Gravesend rowhouse, the original fireplace flue has been abandoned while the adjacent boiler flue still vents the gas appliance; freeze-thaw cycles have cracked the shared chimney crown, letting water drip into the unused flue and rust the damper. A qualified local pro removes the old cap, rebuilds or coats the crown with a flexible sealant, and installs a multi-flue cap that vents both flues correctly while keeping rain and animals out. That’s the sequence we follow, and it’s why we want to see the whole chase before quoting.
The old flue needs to stay dry and the live one needs to stay open. Get that backwards and you either trap moisture against clay tile that should be drying, or you choke the boiler’s exhaust.
Why the Cap and Crown Matter More Than You Think
On a Gravesend chimney, the crown is the masonry cap that deflects rain away from the flues, and the cap is the top-mounted cover that keeps water and animals out. Both wear out faster here than in dry climates. A cracked crown lets water soak the clay tile liner, and once that liner spalls, the boiler’s exhaust path is compromised. A poorly fitted cap blocks draft. Carbon monoxide from a backdrafting gas appliance is a serious risk, so if your boiler flue isn’t drafting right, get it checked by a trained professional before the heating season. Don’t test draft with a flame near the appliance; that’s a job for someone who knows what they’re looking at.
What’s the Best Time to Address a Failing Cap or Crown in Gravesend?
Before the first hard freeze. Fall is when crown coating and cap replacement pay off best in Gravesend, because the work is done before freeze-thaw cycles begin cracking the mortar and before winter nor’easters start driving rain into open flues. Winter jobs are doable but riskier on the roofline. If your crown has visible cracking and the fireplace damper is harder to move than it used to be, book an inspection now rather than after the first cold snap.
Serving Gravesend, NY – Our Local Coverage Area
We serve Gravesend and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Gravesend
Yes. A two-flue chase needs a multi-flue cap, not a single-flue cap. A single-flue cap over a shared chase blocks the boiler flue’s draft and can create backdraft or carbon monoxide risk, so the right cap vents each flue independently while keeping rain and animals out. Call (833) 554-1032 for a free estimate.
Look for visible cracks, crumbly mortar at the top edge, or rust staining at the damper below. On a Gravesend rowhouse the telltale sign is water finding its way into the unused fireplace flue and rusting the damper assembly, which means the crown has already opened up. Inspection from the roof is the only reliable way to confirm it. Call (833) 554-1032 to book one.
Yes, and it may matter more than you’d think. Even without a wood fire, your chimney still vents a gas boiler or water heater here, and an uncapped flue lets rain and animals in. Summer downpours and nor’easters push water straight into open flues, so a proper cap protects the clay tile liner and the appliance draft even if the fireplace stays cold all year. Call (833) 554-1032.
Crown repair rebuilds a failed crown; crown coating seals one that’s cracked but still structurally sound. Coating uses a flexible elastomeric sealant that moves with the masonry through coastal humidity and freeze-thaw, while repair replaces the mortar and re-slopes the top. Which one you need depends on how far the damage has gone, and that’s something inspection settles. Call (833) 554-1032.
Chase sizes and flue layouts vary block to block in Gravesend, and an off-the-shelf cap may not fit your rowhouse. A custom cap is built to the exact chase dimensions and flue count, so an unusual two-flue stack or stepped roofline gets a proper seal at the joint instead of a loose fit that fails under wind-driven rain. Call (833) 554-1032 for an estimate.
A typical single-flue cap in Gravesend runs $225 – $475, a multi-flue cap runs $425 – $825, crown coating runs $350 – $650 and crown repair runs $550 – $1,100. Prices are estimates, set per job by the written estimate, and estimates are free. Call (833) 554-1032 for an exact quote.
Contact Us for Chimney Cap & Crown in Gravesend
Your Gravesend rowhouse has a chimney doing two jobs, and both deserve a proper cap and crown. Call (833) 554-1032 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. Every recommendation is backed by camera evidence you can see, and the written estimate sets the final price. For our full scope, see our Chimney Cap & Crown service.
Written by the team at Chimney Sweep Borough Park.