Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Park Slope
If your chimney is leaking, shedding brick, or showing rust at the cap, we handle the repair from the flue to the firebox. Chimney repair in Park Slope usually means reading a hundred-year-old stack carefully before anyone touches a trowel, because these brownstone chimneys were built to a different set of rules than anything put up since. We know the streets off Seventh Avenue as well as the blocks running down toward the park, and we know what the coastal air does to a rowhouse chimney over a decade. Call (833) 554-1032 and we’ll set up a free estimate.
Why Park Slope Homeowners Call Chimney Sweep Borough Park for Chimney Repair
We’re a chimney specialist, not a general contractor who adds sweeping to a long list. Everything we do runs from the flue to the firebox: sweeping, inspection, cap and crown work, chimney repair, and fireplace repair, all under one company. That matters in Park Slope, where a single repair often crosses from masonry to liner to firebox before it’s finished, and nobody wants to chase a second contractor to close the loop.
Inspection first, recommendation second. We open a formal chimney inspection as its own documented service rather than folding a quick glance into a sweep. When we tell a Park Slope homeowner the crown has cracked or the flashing has rusted through, you get the photos and the reasoning behind it, not a sales pitch. Trade-grade materials, properly installed: we work with chimney repair brands like Gelco, Olympia Chimney, and Copperfield, and we specify stainless components where galvanised parts have already given up. Our technicians have up to 9 years of experience with stacks exactly like the ones lining these blocks.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Park Slope
The coastal Northeast climate does specific damage to Park Slope chimneys. Humid air off the harbor, freeze-thaw winters, and nor’easters work on the top of a stack long before anything goes wrong inside the flue. Here’s how we address it.
Flashing Repair
Flashing is the first thing that fails on a Park Slope rowhouse chimney, and it’s the most common source of the water stains we get called about. The galvanised flashing installed decades ago corrodes fast in salt-heavy air, and once a seam opens, water tracks down the stack and into the masonry. We reset or replace it, and specify stainless where the old metal has rusted through.

Chimney Waterproofing
Original single-wythe brick chimneys soak up moisture, and in this climate that moisture freezes, expands, and breaks the brick apart. Waterproofing is a breathable treatment applied to the masonry so rain sheds off while vapor still escapes. For a Park Slope brownstone, that’s the difference between a stack that holds up through another winter and one that spalls a fresh course every season.

Spalling Brick Repair
Spalling shows up as brick faces flaking or popping off, usually at the top courses where the stack catches the most weather. We replace the failed brick and repoint the surrounding joints so the repair doesn’t just sit next to the problem. On a Park Slope chimney, this is also the point where we look closely at whether the crown above it is shedding water properly.

Mortar Repointing
Mortar is the sacrificial part of a chimney: it’s meant to weather first so the brick doesn’t. Repointing cuts out the failed joints and repacks them with fresh mortar matched to the original. In Park Slope, where the mortar on a hundred-year-old stack has often been patched more than once, matching the mix correctly matters as much as the tuckpointing itself.
Trusted Brands We Service in Park Slope
The materials in your chimney should be the ones certified chimney professionals specify, not whatever happens to be on the shelf. We install and work with DuraFlex flexible liner systems, HeatShield for liner resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. If a Park Slope chimney needs relining, we handle the full job rather than handing it to a subcontractor. If it needs resurfacing, HeatShield application lets us restore a liner without a full replacement, a service plenty of chimney companies simply can’t offer. We don’t claim to keep a warehouse of parts; we specify the right component for the stack and get it installed.
Common Chimney Repair Problems We See in Park Slope Homes
- Rusted caps and flashing. Galvanised components fail fast in the salt air here, and rust-through at the cap and flashing seams usually shows up before the masonry itself gives any trouble. That’s why an inspection so often starts at the top of the stack.
- Cracked crowns on original brick. Freeze-thaw winters split the mortar crown, and once it’s open, water gets into the top courses of the brick. On the original single-wythe stacks common through Park Slope, that water spalls the brick face within a few seasons.
- Shared party-wall stacks. A great many Park Slope rowhouses share one chimney stack with the neighbor, punched through the party wall. A flue or masonry defect on one side gets misread as a single-owner problem, which delays the coordinated repair the stack actually needs on both sides.
- Original unlined or clay-tile flues. Many stacks in the neighborhood still carry the flue they were built with, whether unlined brick or old clay tile, and the boiler or water-heater flue often runs through the same stack. What looks like a cleaning call frequently turns up a lining problem underneath.
Pricing for Chimney Repair in Park Slope, NY
We price every job by written estimate, and the estimate is free. Typical ranges in Park Slope: mortar repointing and tuckpointing on a single stack usually runs $600 – $1,800 depending on how much joint work is needed; spalling brick repair at the top courses typically comes in around $500 – $1,500; flashing replacement is generally $400 – $900, with stainless costing more upfront than galvanised; and a full waterproofing treatment on a Park Slope chimney often runs $350 – $800. If a crown rebuild or a partial stack rebuild is needed, that lands higher, and we’ll tell you plainly when a repair can safely wait. The written estimate sets the final price.
See the difference
Before
After
Before
After
Before
AfterWhat Usually Happens on a Park Slope Chimney Repair
A typical Park Slope chimney repair starts when a pre-season inspection on a century-old rowhouse finds a cracked mortar chimney crown, spalling brick at the top course, and rusted flashing letting water track down the stack. The humid coastal air and freeze-thaw winters push those failures along faster than inland owners expect. Because many of these stacks are shared through the party wall and the flues are original unlined brick or clay tile, a qualified local pro scopes both sides of the stack, confirms the flue liner and smoke chamber condition, then repoints or rebuilds the crown, resets or replaces the flashing, and specifies stainless components where galvanised has already corroded.
There’s a wrinkle unique to this neighborhood: most of these buildings sit inside the Park Slope Historic District, so any exterior chimney repair or rebuild along the street-facing slope needs Landmarks Preservation Commission approval before work begins. That’s not a reason to put the job off. It’s a reason to have the scope documented properly first. We can tell you what the repair involves and what the filing will require; the approval itself is your call to make with the Commission.
We Also Serve Cities Near Park Slope
We work throughout Park Slope and the surrounding neighborhoods. If you’re in Carroll Gardens, Red Hook, Crown Heights, or Kensington, we cover chimney repair there too, and the rowhouse stacks are much the same story. Call (833) 554-1032 to set up an estimate.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Park Slope
Because the top of the stack takes the full force of the coastal weather while the flue stays sheltered inside it. Humid salt air corrodes galvanised flashing and caps, and freeze-thaw winters crack the mortar crown, so the exterior gives out before the flue lining sees real trouble. That’s also why we inspect top-down and report on the cap, crown, and flashing first. Call (833) 554-1032 for a free estimate.
It means the repair may involve both sides of the stack and, often, both owners. These party-wall stacks are common through Park Slope, and a flue or masonry defect on one side can affect the shared structure. We scope both sides during inspection so nobody approves a repair that leaves half the problem in place. Call (833) 554-1032 and we’ll walk through what your stack actually needs.
Yes, if the building sits in the Park Slope Historic District, and most of these brownstones and rowhouses do. Any exterior chimney repair or rebuild along the street-facing slope requires Landmarks Preservation Commission approval before work starts. Interior flue and firebox work generally follows a different path. We’ll document the scope clearly so you know what to file. Call (833) 554-1032 for a free estimate.
Once a year is the right rhythm here, before the heating season. The coastal air corrodes caps and flashing faster than inland conditions do, and a yearly inspection catches rust-through and cracked crowns before water gets into the masonry. Skipping a couple of seasons on an original unlined stack is how a small flashing job turns into a rebuild. Call (833) 554-1032 to book an inspection.
Usually something more than soot. Most of these stacks were built with unlined brick or old clay tile, and many started life as coal fireplaces converted to wood, so opening the flue tends to reveal a lining or masonry problem underneath. That’s the honest answer to why a “cleaning” call so often becomes a repair conversation. Call (833) 554-1032 and we’ll show you what we find before recommending anything.
Contact Us for Chimney Repair in Park Slope
If your Park Slope chimney is leaking, spalling, or due for its yearly inspection, we’ll give you a straight read on the stack and a written estimate that sets the price. Nothing gets recommended without evidence you can see for yourself, and we’ll tell you when a repair can safely wait. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.