Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Kensington
If your chimney crown is cracked or your flashing has pulled away from the brick, chimney repair in Kensington usually runs $180 to $850 depending on what’s actually failing on the shared stack. We know the brick rowhouses along Church Ave and Ocean Parkway well, and we know that a repair here is rarely just one flue. Water gets into masonry, and the shared chimney mass means a problem on your side can reach your neighbor’s. Call (833) 554-1032 for a free estimate, and we’ll send a pro who inspects the whole stack before recommending anything.
Why Kensington Homeowners Call Chimney Sweep Borough Park for Chimney Repair
We work with independent local professionals who focus only on chimneys. That means the person inspecting your Kensington chimney does this every day, not as a side job between roof patches and gutters. Our technicians have up to 9 years of experience, and they know that a Victorian rowhouse on a street like East 2nd near Kensington’s historic core often has a clay flue from the coal era that no longer matches a modern gas furnace.
Kensington customers call us because we diagnose before we sell. Every repair begins with a Level 2 inspection, and we walk you through the photographic evidence before we quote a number. If the masonry can safely wait, we tell you so. We don’t hand off the job to a second contractor either – repointing, waterproofing, flashing work, and liner restoration all stay with one crew from start to finish. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Kensington
The most common repairs we perform around Kensington cluster around the crown, the flashing, the mortar joints, and the brick face – all of which take a beating from freeze-thaw winters and the summer humidity that pushes spalling along old masonry.
Mortar Repointing in Kensington
Repointing is the go-to fix for joints that have receded, softened, or crumbled. In Kensington’s attached rowhouses, that failing mortar often sits on a stack shared between two homes, so the joints need to be matched to the original brick and worked across the full visible face. A typical repointing job here runs $450 to $1,400, depending on how much of the stack needs to be cut back and refilled.

Spalling Brick Repair in Kensington
Spalling is the flaking and popping of the brick face, usually driven by trapped moisture. The old brick in Kensington’s 1920s-40s apartment buildings along Ocean Parkway is especially prone to it, because the exterior masonry has spent decades absorbing moisture and freezing. We replace the damaged brick, address the moisture source, and finish the repair so the wall sheds water instead of holding it.

Chimney Waterproofing in Kensington
A breathable waterproof treatment on the exterior masonry slows water absorption without locking moisture inside. For a Kensington stack exposed to coastal humidity and repeated freeze-thaw, this is one of the highest-value repairs you can make. We apply it after any repointing or brick work is done, so the treatment protects a sound wall instead of sealing in a cracked one.

Flashing Repair in Kensington
Flashing is the metal seal at the roof line where the chimney meets the shingles, and it’s the first thing that fails at the roofline. We repair or replace flashing with stainless components where the original galvanized metal has corroded through – the salt air near Kensington accelerates that corrosion, and galvanized edges can pit through faster than most homeowners expect. This is one of the repairs most often caught on inspection before it becomes a ceiling leak.
Trusted Brands We Service in Kensington
We work with professional trade-grade materials: HeatShield for liner resurfacing and restoration, Gelco for liner components, Olympia Chimney for caps and top-mount work, and Famco when a stainless component is the right fit. Using named materials matters in Kensington, because the shared stacks here don’t leave much margin for shortcuts. Every product is specified to the job and installed on site, and we come back with a written record of what went in and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Kensington Homes
- Corroded caps and flashing on shared stacks. The salt air and freeze-thaw cycles along this stretch of Brooklyn wear galvanized metal down faster than inland areas, and once a cap starts to pit, water enters the shared masonry. Stainless caps and flashing last far longer.
- Spalling brick on the exterior face. Decades of moisture absorption, then a hard freeze, pop the brick face off. The spalling accelerates if the crown is cracked, so crown and brick repair usually go together.
- Deteriorating clay flue liners from the coal era. Many Kensington flues were built for coal and later connected to gas or oil furnaces, and the clay no longer matches the appliance. Condensate from a high-efficiency furnace can degrade old clay tile, and a cracked liner can leak carbon monoxide into a neighboring unit.
- Cracked mortar crowns. Original masonry crowns on these chimneys often crack and go unrepaired, and each season lets more water into the stack. A crown replacement with the correct overhang and slope prevents the damage before it spreads down the brick.
Pricing for Chimney Repair in Kensington, NY
Estimates are free, and the final price is set per job by the written estimate after inspection. A typical mortar repointing job in Kensington runs $450 to $1,400. Spalling brick repair often falls in the $300 to $1,200 range for isolated areas, while chimney waterproofing typically runs $250 to $650. Flashing repair is usually $200 to $600. A full crown replacement starts around $400 and can reach $1,200 on an especially large or irregular stack. We don’t quote a number until we’ve seen the whole shared chimney, and we’ll tell you plainly when a repair can wait a season.
We Also Serve Cities Near Kensington
Chimney repair is booked through our chimney repair service, which covers Kensington and the surrounding Brooklyn neighborhoods. That includes Flatbush, Borough Park, Midwood, and Sunset Park, all within the same short dispatch radius. If you’re just over the line in one of those communities, call and we’ll confirm coverage.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Kensington
Once a year is the practical standard for Kensington, and an annual Level 2 inspection is the right baseline for a shared rowhouse stack. The salt-air exposure and freeze-thaw winters here stress metal and masonry faster than in less exposed areas, so catching a failing crown or corroded flashing at the one-year mark usually costs far less than catching it at year three. Call (833) 554-1032 for an exact quote – estimates are free.
Responsibility usually follows the property line, so the portion of the stack over your roof is typically yours, but the diagnosis should cover the whole shared mass. Because Kensington’s attached rowhouses often share one chimney, a crack on one side can push water or carbon monoxide toward the other, and a professional inspection here routinely documents both sides. What we’re good at is giving you clear photographic evidence you can share with a neighbor so you can sort out the split together. Call (833) 554-1032 for an exact quote – estimates are free.
A creosote smell in a neighboring unit, a furnace that backdrafts, or visible white staining on the exterior of the shared stack all point to a failing clay liner. Many Kensington flues were built for coal and later connected to gas or oil, and condensate from a modern appliance can degrade old clay tile. A camera inspection shows you exactly what’s happening inside the flue before any repair is recommended. Call (833) 554-1032 for an exact quote – estimates are free.
Yes. Salt air accelerates corrosion on galvanized caps and flashing, and when the metal corrodes, water enters the shared masonry and begins the spalling cycle. Swapping galvanized for stainless components is often the fix, and stainless outlasts the original metal by a wide margin in this climate. Call (833) 554-1032 for an exact quote – estimates are free.
Repointing is grinding out old mortar and refilling it flush with the brick, while tuckpointing adds a finished look with a contrasting mortar line, usually on visible facades. Most Kensington chimneys with a failing crown or spalling brick need repointing, because the goal there is water shedding rather than appearance. A close inspection tells you which is the right call for your stack. Call (833) 554-1032 for an exact quote – estimates are free.
Kensington chimneys take a beating from salt air, freeze-thaw winters, and the old coal-era masonry that sits behind them. If your crown, flashing, mortar, or brick is showing its age, the smart move is a documented inspection first and a written estimate second. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.