Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Park Slope
If your chimney crown has gone porous or your cap is loose, we can help. We handle cap installation, cap replacement, crown repair, and crown coating for Park Slope homeowners, treating every roof as the century-old brownstone or rowhouse it usually is. Most of the buildings here were put up between the 1880s and the 1910s, and their chimney tops have been taking coastal weather ever since. Call (833) 554-1032 for a free estimate. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday.
Why Park Slope Homeowners Call Chimney Sweep Borough Park for Chimney Cap & Crown
Park Slope has a specific chimney problem, and it comes from the age of the housing as much as the weather. Rows of brownstones and brick rowhouses still carry original single-wythe brick stacks, parlor fireplaces converted from coal to wood, and flues that are unlined or lined in clay tile. Many of those stacks also share space with a boiler or water-heater flue. A cap or crown job on a building like this is rarely just a lid on top. It’s a look at how the whole top of the stack sheds water and draws air, and we approach it that way.
Our technicians have up to 9 years of experience, and we work with trade-grade materials from HeatShield, Gelco, Olympia Chimney, and Famco. We treat the estimate as the start of the conversation, not a sales pitch. Anything we recommend on a Park Slope roof comes with camera inspection and a photo report you can review yourself, so you’re never guessing about what’s up there. The local professional we connect you with is licensed and insured as their state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Park Slope
Cap Installation
A correctly sized cap keeps rain, birds, and debris out of the flue while letting smoke escape. On a Park Slope rowhouse with a single flue, a standard stainless cap often works. On a shared party-wall stack, though, the cap has to fit every flue in the stack, and that means a careful measurement before anything goes on. We size it to the flue it actually serves, not to what’s on the shelf.

Cap Replacement
A cap that’s rusted through, cracked, or been forced onto the wrong flue causes more trouble than no cap at all. It can choke draft or trap moisture against the brick. We pull the old one, check the flue underneath with a camera, and fit a replacement that matches the flue’s real dimensions. If we find a problem below the cap, we tell you before we install the new one.

Crown Repair
The mortar crown is the sloped top that sends water off the stack instead of into it. Original crowns on 1880s to 1910s Park Slope stacks have usually cracked and gone porous by now, and freeze-thaw winters push meltwater straight into the brick. We rebuild crowns with a proper slope and overhang so water leaves the stack the way it should. If the chimney is in the Park Slope Historic District, exterior repair means Landmarks Preservation Commission approval, so we walk you through that first.

Crown Coating
When the mortar crown is sound underneath but the surface has gone cracked and chalky, a coating can restore the top without a full rebuild. We use Gelco crown coating for this kind of resurfacing, which seals the surface while letting the masonry breathe. It’s a repair for a crown that’s still structurally intact, not a patch over one that isn’t. Our camera inspection tells us which of the two you actually have.
Trusted Brands We Service in Park Slope
We work with a defined set of trade-grade brands: HeatShield for liner resurfacing, Gelco for crown coating, Olympia Chimney for cap and flue components, and Famco for chimney accessories. These are the materials specified by certified chimney professionals, and using them means a repair that’s meant to last the season and the next. We don’t keep a local stockroom; components are ordered to the job once the inspection confirms what’s needed. That keeps the cap sized to your actual flue instead of the closest thing available. For a Park Slope stack carrying more than one flue, that difference matters. If you’d like to see how we approach cap and crown work overall, our chimney cap & crown team can explain the full process.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Park Slope Homes
- Porous, cracked mortar crowns. Original crowns on 1880s to 1910s stacks have cracked and gone soft, so freeze-thaw winters and nor’easters push water into the brick instead of shedding it. The first sign is often spalling brick and a stain on the ceiling below.
- Wrong-sized caps on shared stacks. An off-the-shelf cap made for a single flue gets forced onto a party-wall stack that carries both a fireplace flue and a boiler or water-heater flue. That chokes draft and traps moisture against the masonry.
- New caps hiding old flues. A fresh crown or cap gets put on top of an unlined or deteriorating clay-tile flue, which buries the real problem until creosote or water damage shows up in the smoke chamber.
- Water intrusion at the top. In a humid coastal climate with freeze-thaw winters, the chimney top is where water gets in first. A proper cap and crown are the front line, and they’re often the cheapest fix if they’re caught early.
Pricing for Chimney Cap & Crown in Park Slope, NY
Chimney cap and crown work in Park Slope runs on the higher side of the regional range because most of these stacks are old, multi-flue, or shared through a party wall. A typical single-flue cap installation in Park Slope runs $250 – $550 installed. A multi-flue cap for a shared stack runs $450 – $900. Crown repair (rebuilding the mortar top with proper slope and overhang) runs $600 – $1,500, and crown coating with Gelco runs $350 – $800 depending on the size of the crown and how much prep it needs. Custom caps for irregular stacks start around $700 and go up. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Park Slope
We look after chimneys across Park Slope and the neighborhoods around it, including Carroll Gardens, Red Hook, Crown Heights, and Kensington. Every one of those areas has the same century-old brownstone and rowhouse stock, the same shared party-wall stacks, and the same freeze-thaw winters working on the chimney tops. If you’re just over the line in one of them, we can help there too.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Park Slope
Because most Park Slope brownstones and rowhouses sit inside the Park Slope Historic District, and any exterior chimney repair or rebuild requires Landmarks Preservation Commission approval. That means the job is never just a sweep: it’s a documented repair that has to go through review before work starts. We help you understand what the approval covers so nothing is done before it’s cleared. Call (833) 554-1032 for an exact quote; estimates are free.
It usually comes down to a shared cost, because the stack in a Park Slope rowhouse is frequently punched through the party wall and serves both buildings. Rebuilding the crown on one side can mean coordinating access, cost, and sign-off with the neighbor, and the cap often covers flues serving both homes. We can document the shared structure with photos so both owners are working from the same information. Call us and we’ll walk you through what a split job looks like.
You know because the evidence is on camera and in a photo report you can see for yourself. On a century-old Park Slope stack, the flue is often original unlined brick or aging clay tile, and the inspection is what tells us which. Nothing gets recommended without that footage, and we say plainly when a repair can safely wait. If a liner is genuinely needed, HeatShield resurfacing can restore some flues without a full replacement. Call (833) 554-1032 for an exact quote; estimates are free.
Crown coating works when the mortar crown underneath is still structurally sound but the surface has gone cracked and porous. If the crown has lost its slope, cracked through, or separated from the flue, coating won’t hold and the crown needs a rebuild instead. Spalling brick on the stack below is a separate signal that water has been getting in. The camera inspection tells us which repair fits, and nothing is recommended until you’ve seen the footage. Call us for an exact quote on either option.
It’s common in Park Slope because these buildings were built when a boiler and water heater could vent through the same masonry stack as the fireplace, and it directly changes the cap. That shared arrangement means an off-the-shelf single-flue cap can’t do the job; you need a multi-flue or custom cap sized to each flue so each vent draws correctly and neither traps moisture. Get the sizing wrong and the draft suffers. Call (833) 554-1032 for an exact quote; estimates are free.
If your chimney top has cracked, your cap is loose, or you’re just not sure what’s up there, get in touch. We’ll run the inspection, show you the footage, and quote the repair from what we actually see. Call (833) 554-1032 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.