Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Gravesend
Chimney repair in Gravesend usually starts with water, not fire. Most of the brick chimneys here are exterior masonry chases on one- and two-family rowhouses, and the wear shows up on the outside of the stack before anyone notices anything indoors. We work on Gravesend chimneys as venting systems first and fireplaces second, because that’s what most of them actually are. Our technicians have up to 9 years of experience, and we keep the work documented from the first inspection to the last trowel of mortar. Call (833) 554-1032 to set up a free estimate.
Why Gravesend Homeowners Call Chimney Sweep Borough Park for Chimney Repair
Gravesend is dense brick rowhouse country. A crumbling mortar joint on one house is a preview of what’s happening on the block, so the feedback loop here is short and word travels. We hear from homeowners along Gravesend’s quiet residential blocks and from the busier stretches near the commercial corridors, and the calls tend to sound alike: white staining on the brick, a crown that’s flaking apart, a boiler flue that doesn’t draft the way it used to.
What makes us worth a call is what we bring to the diagnosis. We run a formal chimney inspection as a standalone service, not a cursory walkthrough bundled into a sweep, which is the only honest way to separate an abandoned fireplace flue from a live appliance flue in the same stack. From there the repair work is ours to finish: mortar repointing, spalling brick replacement, waterproofing, flashing, crowns. No handoff to a second contractor partway through the job. We use trade-grade materials from HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so you know what’s going into your chimney before the work begins. If you want a straight assessment of a Gravesend chimney with no pressure to approve anything you can’t see for yourself, that’s what we do.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Gravesend
Mortar Repointing
The joints between bricks are the first thing to go on an exterior chimney in Gravesend. Coastal humidity and winter freeze-thaw pull at the mortar until it turns sandy and washes out, leaving the brick edges unsupported. Repointing means grinding out the failed mortar to a proper depth and packing in fresh material so the joints shed water again. Done right, the brickwork reads clean and even when the scaffold comes down.

Spalling Brick Repair
Spalling is what happens when water gets into the brick face itself and freezes, popping off a shard at a time. Gravesend’s one- and two-family brick rowhouses show it on the chimney chase more than anywhere else on the house, because the stack takes the weather from every direction. We replace the failed brick with matching units and re-bed it in sound mortar, so the chimney stops shedding material onto the roof and sidewalk below.

Chimney Waterproofing
Sealing masonry isn’t a paint job. The right treatment lets vapor escape while blocking liquid water, which matters in a Gravesend climate that swings between humid summers and hard freezes. A chimney crown in poor condition gets rebuilt first, because waterproofing over a failing crown just traps the problem underneath. Waterproofing does its best work as a follow-up to repointing, not a substitute for it.

Flashing Repair
Flashing is the metal collar where the chimney passes through the roof, and it’s the most common hidden source of water damage in Gravesend homes. When the flashing pulls away from the masonry or the step flashing rots out, water runs down the chase and into the attic or ceiling below. We reflash the joint and tie it back into the roofline so the seal holds through a nor’easter.
Trusted Brands We Service in Gravesend
We work with HeatShield, Gelco, Olympia Chimney, and Famco because these are the materials specified by chimney professionals across the trade, and they hold up to NYC’s weather. When a repair calls for a liner component or a restoration application, we quote the brand up front so you can look it up yourself. That matters here, because many Gravesend chimneys carry two different flues in one chase and the right product for each is not the same. Restoring a damaged clay-tile liner with HeatShield resurfacing keeps a sound chimney working without a full tear-out. When a liner is too far gone, a DuraFlex flexible liner system is the standard relining route, installed by the same crew that scoped the job.
Common Chimney Repair Problems We See in Gravesend Homes
Gravesend’s housing stock is its own repair manual. Here’s what a brick chase on a 1920s-to-1950s rowhouse typically shows us:
- Water getting in past a failed crown. Coastal humidity and freeze-thaw cycles work on an uncapped or crown-damaged flue all winter, and the first sign indoors is often a rusted boiler flue connection rather than a stain on the ceiling.
- An abandoned fireplace flue and a live appliance flue treated as one system. Retrofitted gas boilers vent through the same masonry stack as an old capped or abandoned fireplace flue, and homeowners tend to service the dead flue while the working one goes uninspected.
- Clay-tile liners that don’t match what’s venting through them. Many of these houses were built with clay-tile flues sized for a wood-burning fireplace, then later fitted with a gas boiler and water heater, so a Level 2 inspection is the only way to catch gaps, misalignment or corrosion a brush-and-vacuum visit never sees.
- Spalling brick and crumbling mortar on the exterior chase. Gravesend’s rowhouse chimneys sit fully exposed, so the mortar joints and brick faces carry the freeze-thaw stress that shows up as white efflorescence, crumbling joints and shards on the roof.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Gravesend, NY
Gravesend repair pricing tracks the size and condition of the chimney, not the neighborhood zip. Relining and rebuilding are the big-ticket jobs and they carry the widest range, because a full rebuild on a two-family rowhouse is a different scope than a crown repair on a semi-detached house. You get a written estimate that sets the final price before any work is scheduled, and nothing beyond that scope goes forward without your say-so. If the chimney can safely wait a season, we tell you that too.
| Service | Typical estimated range in Gravesend |
|---|---|
| Mortar repointing | $400 – $1,200 |
| Spalling brick repair | $350 – $900 |
| Chimney waterproofing | $300 – $750 |
| Flashing repair | $350 – $850 |
| Chimney crown repair | $400 – $1,000 |
| HeatShield liner resurfacing | $1,200 – $2,500 |
| DuraFlex liner relining | $2,500 – $5,500 |
| Chimney rebuild | $6,000 – $15,000 |
We Also Serve Cities Near Gravesend
We’re a chimney repair team serving Gravesend and the surrounding stretch of southern Brooklyn, including Bensonhurst, Sheepshead Bay, Midwood and Dyker Heights. If you’re just outside the Gravesend lines, call and we’ll confirm coverage before booking. The brick and coastal-moisture conditions are much the same, so the process and the pricing ranges hold.
Serving Gravesend, NY – Our Local Coverage Area
We serve Gravesend and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Gravesend
Yes, but for entirely different reasons. The boiler flue is a working venting system that carries combustion gases and needs an annual inspection for draft, liner condition and carbon monoxide safety. The capped fireplace flue is inactive, so its job is to stay capped and sealed against water and animals, not to be swept. A repair call here often starts as fireplace work and ends as a flue assessment on the appliance side. Call (833) 554-1032 to book an inspection.
Those white stains are efflorescence, and they mean water is moving through the brick and leaving salt deposits behind. The usual culprit is a failed crown or an uncapped flue letting coastal rain and freeze-thaw water into the masonry, which then degrades the mortar and eventually the brick face. Repointing, a crown repair and waterproofing together stop the cycle. Call (833) 554-1032 for a free estimate on the repair.
Yes, because the inspection isn’t only about wood smoke. In a Gravesend rowhouse the more important question is whether the gas boiler, water heater or exhaust flue in that masonry stack is venting correctly, and that can go wrong whether or not you ever light a fire. A yearly Level 1 or Level 2 inspection catches liner gaps, misalignment and corrosion before they become a draft problem or a hazard. Call (833) 554-1032 to schedule one.
Creosote builds up in stages. First-degree is a light, flaky soot that a brush removes easily. Second-degree is a glaze that needs more work. Third-degree is a hard, tar-like layer that brushing can’t remove and that can feed a chimney fire, and that’s when repairs to the liner or flue become necessary. If you burn wood in a Gravesend fireplace, a sweep and inspection catches the build-up before it reaches the third stage. Call (833) 554-1032 to book a sweep and inspection.
Usually both, but the chimney is often the real cause. Summer humidity is denser and can stall the weak draft in a clay-tile flue that was sized for a different appliance and is already cracked or misaligned. If the draft only fails on humid days, that’s a sign the flue needs a real inspection rather than a weather excuse. A Level 2 inspection separates the appliance flue from any abandoned fireplace flue and tells us whether liner repair or relining is the fix. Call (833) 554-1032 to schedule an inspection and free estimate.
What a Typical Gravesend Repair Job Involves
A Gravesend homeowner usually calls after a winter of freeze-thaw, when the exterior chase shows efflorescence or a crumbling mortar joint, or after a gas boiler flue starts drafting poorly on a humid summer day. The usual cause is water getting in past an uncapped or failing crown and degrading the clay-tile liner and mortar over time, with coastal humidity making it worse. The way it goes: a qualified pro runs a Level 1 or Level 2 inspection, separates the appliance flue from any abandoned fireplace flue, then repoints, re-crowns, or relines as the evidence calls for. That’s the difference between a repair and a sweep with a nod. Call (833) 554-1032 for a free estimate.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.