Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Midwood
Most chimney repair work in Midwood starts with a camera, not a sales pitch. The brick houses here are mostly pre-war and post-war semidetached and detached homes, and a lot of their original clay tile flues now vent gas boilers and water heaters rather than wood fires. That changes what repair means: it’s about keeping flue gases safely contained and water out of old masonry, not sweeping soot from a fireplace you rarely use.
We know these blocks. We’re familiar with the two- and three-story brick semis off Ocean Avenue and along the streets near Brooklyn College, and with the low-rise apartment buildings where a chimney has gone uncapped for years. Call (833) 554-1032 and we’ll book an assessment. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Borough Park for Chimney Repair
Midwood has a lot of older chimneys, and it has a lot of contractors willing to sell a full relining on the strength of one glance at a crumbling crown. We work the other way: inspection first, recommendation second. A proper look means running a camera down the flue and showing you the footage, so the decision is yours, made on evidence you can actually see. That approach has built a strong local reputation among Midwood homeowners who’ve been quoted thousands for work they weren’t sure they needed.
Our technicians have up to 9 years of experience and work with the recognized trade-grade brands – DuraFlex liner systems, HeatShield for liner resurfacing, and cap and crown materials from Olympia Chimney, Famco, Gelco and Copperfield. When we do recommend a repair, we tell you exactly which material goes in and why. No handoff to a second contractor, no subcontracting the relining.
Response time to Midwood is quick. The neighborhood is compact and we know how to schedule around it, so an assessment for a house near Avenue J or along Coney Island Avenue gets on the calendar without a long wait. We’re closed Saturdays; a call on a Saturday gets booked into Sunday, the next opening in our Sunday through Friday, 7am to 7pm dispatch window.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Midwood
Mortar Repointing
Repointing is the most common repair we do in Midwood. Coastal New York winters bring freeze-thaw cycles that work into the joints of older brick stacks, popping the mortar and leaving the brick looser with each thaw. We rake out the failed joints and repack them with fresh mortar matched to the age and color of the original, so the repair reads as part of the chimney rather than a patch. That matters on the brick semis here, where a mismatched joint stands out from the curb.

Spalling Brick Repair
Spalling is what happens when water gets into a brick, freezes, and pushes the face off. On Midwood’s 1920s – 1950s houses, it’s usually concentrated at the top of the stack, where rain and snow hit hardest. We replace the damaged units and address the water source feeding them, because a brick replaced over a leak will just spall again. Humid summers and nor’easters drive a lot of that intrusion here, so getting the source right matters as much as the masonry.

Chimney Waterproofing
A breathable masonry sealer keeps bulk water out while letting the chimney dry from the inside, which is the correct order of operations: repairs first, then sealing. We waterproof after any repointing or brick work is done, not before, so we’re not trapping moisture behind a coating. On shared stacks along Midwood’s party walls, sealing the visible face without checking the neighbor’s side is half a job.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the leak point homeowners most often miss. When flashing pulls away or the sealant fails, water runs down the outside of the stack and shows up as a stain on a ceiling two floors down. We re-set or replace the flashing and check the roof line while we’re up there. A missing cap on a Midwood chimney lets rain and animals straight into the flue, and flashing failure is usually the second water path.
Trusted Brands We Service in Midwood
We install trade-grade components, the same materials specified by certified chimney professionals. That means HeatShield for liner resurfacing, DuraFlex flexible liner systems for full relining jobs, and Gelco, Olympia Chimney, Famco and Copperfield for caps, dampers and related parts. We don’t claim to stock parts or run a warehouse – what we do is source the right brand for your flue and install it correctly, with the turnaround booked into the job. When you ask what’s going into your chimney, we’ll tell you by name.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Midwood Homes
- Crumbling crowns after a hard winter. Freeze-thaw cycles crack the mortar crown at the top of the stack, and if it gets patched cosmetically instead of rebuilt, water keeps reaching the clay tiles and the flue keeps deteriorating each season.
- Missing caps on shared stacks. A lot of Midwood chimneys have no cap at all. On a semidetached block, water running into a party-wall chimney can cause spalling brick on the neighbor’s side, which often gets misdiagnosed as a problem with the wrong chimney.
- Cracked or misaligned clay tile flues venting gas. Much of the original clay tile here now vents a boiler or water heater. Those flues crack and spall over time, and a crack that lets flue gas into the masonry is a venting problem, not a cosmetic one.
- Water intrusion from faulty flashing and open mortar joints. Humid summers and nor’easters push water into old masonry, and it finds the weakest joint. That’s usually where the chimney meets the roof, or where a joint has already gone soft.
Pricing for Chimney Repair in Midwood, NY
Estimates here are free, and the written estimate sets the final price. Typical ranges for Midwood give you a sense of what each job runs. A mortar repointing job usually runs $450 – $1,200, depending on how much of the stack is involved and the height of the chimney. Chimney waterproofing runs $250 – $600. Flashing repair typically costs $300 – $750, and a crown rebuild runs $400 – $900. Full relining with a DuraFlex system, when the camera shows it’s actually needed, runs $2,000 – $4,500. HeatShield resurfacing, when the clay tile is still structurally sound and just needs restoration, often costs less than a full replacement. Nothing gets recommended beyond what the camera footage shows.
We Also Serve Cities Near Midwood
We cover Midwood and the neighborhoods around it, including Flatlands, Kensington, Bensonhurst and Flatbush. The brick housing and the shared party-wall chimneys are similar across these areas, so the same inspection-first approach applies. If you’re just over the line in one of them, the booking works the same way. Call and we’ll get you on the schedule.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Midwood
Yes. On Midwood’s party-wall blocks, a cracked flue or missing cap on one side of the stack can push water and debris into the adjacent flue, so a proper repair assessment checks both stacks even when only one chimney shows symptoms. This is one of the reasons a thorough inspection beats a quick look from the roof. Call (833) 554-1032 to book an assessment – estimates are free.
You know from camera evidence, not from what a contractor says standing on the roof. A hairline crack in clay tile that’s still structurally sound may only need resurfacing with HeatShield; a flue with cracked, misaligned or missing tiles that can’t safely contain flue gases needs a full DuraFlex relining. We run the camera, show you the footage, and let the tile condition decide, not the sales target. Call for an estimate.
It’s usually a rebuild. A crumbling crown from Midwood’s freeze-thaw cycles needs to be rebuilt rather than patched, because a cosmetic patch lets water keep reaching the clay tiles and the flue deteriorates further each winter. A crown rebuild typically runs $400 – $900 in this area. Call (833) 554-1032 for an exact quote on your chimney – estimates are free.
Yes. A gas-vented flue still needs a proper inspection, and in Midwood where many of the original clay tile flues now vent gas boilers and water heaters rather than fireplaces, that inspection is often the whole reason for the call. It’s a venting-inspection job, and the camera tells us whether the tile can still contain flue gas safely. Call to schedule one – estimates are free.
Yes. We assess creosote by degree during the inspection, and the camera and sweep tell us which stage you’re at. First-degree is light and brushes off; second-degree is glazed and harder to remove; third-degree is a thick, hardened layer that needs more than a standard sweep. That distinction matters for how the flue is cleaned and whether repair is needed first. Call (833) 554-1032 to book – estimates are free.
If your Midwood chimney shows a crumbling crown, spalling brick or a flue that hasn’t been checked since the last hard winter, get it looked at before the problem gets any deeper. Our team works the full chimney from the flue to the firebox, with trade-grade materials and camera evidence before any recommendation. Call (833) 554-1032 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. If you’re curious about the broader scope of what we handle, see our chimney repair page.
Written by the team at Chimney Sweep Borough Park.