Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Kensington
If you live in Kensington, you already know the housing here is packed tight. Brick row houses sit shoulder to shoulder, and the chimney on your roof is often the same chimney your neighbor uses. That changes what a sweep should be. We know the streets around Church Ave and Ocean Parkway well, we know how these attached stacks behave, and we treat a Kensington sweep as an inspection of the whole chimney mass, not a quick pass down one flue. Call (833) 554-1032 and we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Kensington Homeowners Call Chimney Sweep Borough Park for Chimney Sweep
We work as a chimney specialist, not a general contractor who adds sweeping on the side. That matters in a neighborhood where the diagnosis usually matters more than the brush. Our technicians have up to 9 years of experience, and our chimney sweep work always starts with a documented inspection, so you get a written picture of what’s actually happening in the flue before anyone recommends a repair.
Kensington customers tell us the same thing again and again: they want to know which materials are going into their home. So we name them. We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, the same trade-grade products certified chimney professionals specify across the country. Nothing gets handed off to a second contractor, and we don’t subcontract the relining side of the job. One crew handles it start to finish.
We also know that roof access in tight attached-rowhouse blocks is its own problem. Getting to a party-wall chimney safely, checking the crown and flashing without disturbing the neighbor’s side, and documenting a shared stack takes patience and the right equipment. That’s the work we do throughout Kensington, from the blocks off Coney Island Ave to the apartment buildings near Ocean Parkway.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Kensington
A smoke test and a visual check don’t tell the same story here, because so many Kensington flues were built for coal and later connected to gas or oil furnaces. Here’s how each service applies to your building.
Level 2 Inspection
This is the backbone of what we do in Kensington. A Level 2 inspection uses a camera to look inside the flue, and in attached row houses we recommend it before any appliance is connected or reconnected. Because neighboring homes often share a single chimney mass, a proper inspection here means evaluating the shared stack on both sides, not just the flue serving your unit.

Creosote Removal
Creosote is a bigger concern than most people expect in a neighborhood with relatively few wood-burning fireplaces. Where someone does burn wood, the residue builds fast in an undersized or cracked clay-tile flue. We remove it with the right tools for the stage it’s reached, and we show you what came out so the recommendation makes sense.

Soot Removal
Soot and oily deposits collect differently in a furnace flue than in a fireplace chimney. In Kensington’s early-20th-century apartment buildings and row houses, we sweep from the firebox up through the flue and clean the smoke chamber and damper as we go. We contain the dust, and we leave the unit clean.

Fireplace Cleaning
When there is a working fireplace, from the firebox to the throat, grates, glass and surround all hold soot and ash that a flue brush alone won’t reach. We clean the whole assembly and check that the firebox masonry and damper are sound before the season turns cold.
Trusted Brands We Service in Kensington
When a flue needs relining, the brand matters. We install DuraFlex flexible liner systems for full relining, and we’re capable of HeatShield application for liner resurfacing and restoration without a full replacement, a service many sweep companies can’t offer. We also work with Gelco, Olympia Chimney, Famco and Copperfield components for caps, crowns and chimney repair. We name these products because you deserve to know what’s going into your chimney, and we don’t sub the relining work out. One crew carries it from the inspection to the finished job.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Kensington Homes
These are the failure modes that come up again and again in Kensington, and each one has a specific cause in the local housing stock.
- Shared stacks serviced one side at a time. A sweep that cleans only your flue and ignores the shared chimney mass leaves a neighbor’s cracked liner or missing cap feeding odors and carbon monoxide risk straight back into your unit.
- Gas furnaces on coal-era flues. Many homeowners assume a gas appliance needs no service. High-efficiency furnaces push condensate that quietly degrades an unlined or clay-tile liner built for coal, so the flue keeps failing behind a furnace that otherwise runs fine.
- Freeze-thaw cracking and summer spalling. New York’s winters crack aging mortar crowns and chimney brick, and summer humidity drives spalling in the old masonry. Roof work in tight attached blocks that skips the crown, flashing and cap lets that damage go unrepaired.
- Odors in rooms with no fireplace. A musty or oily smell in a room that has no fireplace usually points to a flue problem, a blocked or cracked liner that no longer matches the appliance venting into it. It’s a symptom worth chasing with a camera, not masking with an air freshener.
Pricing for Chimney Sweep in Kensington, NY
A typical chimney sweep in Kensington runs $150 – $275, and a Level 2 inspection with a camera runs $225 – $425. Creosote and soot removal is usually folded into the sweep price unless the build-up has reached a hard stage that takes more labor. Liner resurfacing with HeatShield typically runs $1,100 – $2,400, and a full DuraFlex relining job runs $2,800 – $6,500 depending on flue height and access. Several factors move these ranges: the height of the stack, whether the chimney is a party wall shared with a neighbor, how tight the roof access is, and how much build-up has to come out. The written estimate sets the final price, and the estimate itself is free. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait until next season.
We Also Serve Cities Near Kensington
The same shared-stack discipline and trade-grade materials we use here go with us to nearby neighborhoods. If you’re just outside Kensington, we cover Flatbush, Borough Park, Midwood and Sunset Park with the same inspection-first approach. Wherever you are, our Kensington crew can point you to the right service, so call and we’ll confirm coverage for your building.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Kensington
Yes, we routinely inspect the whole shared stack, not just your flue. In Kensington’s attached brick row houses, adjacent homes often share a single chimney mass, so a cracked liner or missing cap on the neighbor’s side can push carbon monoxide or creosote odors into your unit. Checking both sides is part of doing the job properly here. Call (833) 554-1032 for a free estimate.
Yes, and it needs inspecting even more than a wood-burning flue does. High-efficiency gas furnaces push condensate that degrades the old clay-tile or unlined flue, and many Kensington chimneys were originally built for coal then converted to gas or oil. A camera inspection shows whether the liner still matches the appliance venting into it. Call (833) 554-1032 to schedule one.
First-degree creosote is a light, flaky soot that a standard sweep removes; third-degree is a hardened, glazed layer that needs more than a brush and signals a chimney fire risk. Most build-up falls somewhere in between, and we identify the stage under camera before we recommend how to remove it. If you’re unsure what’s in your flue, call (833) 554-1032 for a free estimate.
Because you likely share a chimney mass, and a cracked flue liner or missing cap on the neighbor’s side lets odors and carbon monoxide travel into your space. A musty or oily smell in a room with no fireplace is the classic sign, and it’s why a Kensington sweep means inspecting the shared stack. Call (833) 554-1032 and we’ll trace where it’s coming from.
Yes. Even with no wood-burning fireplace, a gas or oil furnace vents through a flue that needs to be checked, especially in older Kensington buildings where the liner may not match the appliance. The concrete failure we see most is skipping service because the fuel changed. Call (833) 554-1032 for a free estimate on a Level 1 or Level 2 inspection.
Whether you’ve just noticed a smell, you’re keeping up with an annual sweep, or a neighbor’s repair has you wondering about the shared stack, the right first step is a look inside the flue with a camera. Call (833) 554-1032 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll show you what we find before anything is recommended.
Written by the team at Chimney Sweep Borough Park.