Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Sunset Park
If you own or rent in a Sunset Park rowhouse or walk-up, your chimney has probably been working harder than anyone told you. We sweep, inspect and repair the coal-era flues that run up through the attached buildings along these blocks, and we know how the harbor air treats the caps and crowns up top. Call (833) 554-1032 and we’ll book a sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Sunset Park Homeowners Call Chimney Sweep Borough Park for Chimney Sweep
Sunset Park chimneys are a specific problem. Much of the neighborhood was built before anyone thought about flue liners, and the salt air coming off the harbor adds a second layer of wear that inland streets never see. We work inside that reality every week, which is why homeowners here call us back.
Every job starts with an inspection, not a sales pitch. We run a documented Level 1 or Level 2 assessment, show you the camera footage, and only then talk about what needs doing and what can safely wait. Our technicians have up to 9 years of experience with old brick shafts, shared stacks and the cast-iron dampers that rust shut in these buildings.
We also keep to one crew from start to finish. If your sweep turns up a failed cap or a spalling crown, the same team handles the fix with trade-grade materials instead of handing you off to a second contractor. One crew, start to finish. That matters on a block where the flue may not belong to one address alone.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Sunset Park
We cover the full arc here, from routine cleaning through inspection and repair. Explore our chimney sweep services if you want the broader picture of what a visit involves. These are the four jobs Sunset Park homeowners ask for most.
Level 1 Inspection in Sunset Park
A Level 1 inspection covers the readily accessible parts of the chimney and is the right call when your flue is in known working order and nothing has changed. In a Sunset Park rowhouse it’s often the annual check that catches a rusting damper before it seizes. We document what we see so you have a record of the flue’s condition, not just a verbal nod.

Level 2 Inspection in Sunset Park
A Level 2 inspection goes further, using a camera to look inside the flue and smoke-testing the shaft. On these attached buildings that’s the inspection that matters most, because it’s the only way to find out whether your flue crosses into the neighboring boiler flue through the party wall. It’s also the level you want before any relining work.

Creosote Removal in Sunset Park
Creosote builds up in layers, and the glazed third-degree stage won’t come off with a brush alone. In the old coal-era flues common here, we assess the layer first and then choose the right method, whether that’s standard brushing or a chemical treatment. Removing it properly is what keeps a flue safe to use.

Soot Removal in Sunset Park
Soot accumulates differently in oil and gas flues than in a wood-burning fireplace, and it’s the fine stuff that drifts into the smoke chamber and connectors. We clear it out thoroughly and check the stovepipe joints while we’re in there. Humid summers here accelerate rust on those connectors, so it’s worth a look each year.
Trusted Brands We Service in Sunset Park
When a repair or reline is needed, we work with the trade-grade brands that certified chimney professionals specify. That includes HeatShield for liner resurfacing, DuraFlex flexible liner systems for full relining, and Gelco components. We don’t claim to stock parts locally; we specify and install the right materials for the job, which means the fix is built to last the season, and the next. If your existing cap or liner is one of these makes, we can service it too.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Sunset Park Homes
The spine of chimney trouble in Sunset Park is salt air meeting old brick and galvanized metal. Here’s what fails first.
- Galvanized caps and flashing rusting through. Salt-laden harbor air and humid summers eat galvanized steel within a few years, when a stainless cap over correctly lapped flashing would outlast the roof.
- Spalling crowns and opening mortar joints. Repeated winter freeze-thaw cycles break down old brick and mortar, and meltwater then runs down into shared multi-unit flues.
- Seized cast-iron dampers and corroded connectors. Coal-era flues that were never relined trap moisture, and the cast-iron dampers and stovepipe connectors seize or corrode shut, causing poor draft and back-puffing into apartments.
- Cross-drafting between party-wall flues. Where shafts run through the party wall, a windy-day smoke test often shows one flue pulling from a neighbor’s unit, which no single-address inspection would catch.
Pricing for Chimney Sweep in Sunset Park, NY
A typical annual sweep and Level 1 inspection in Sunset Park runs $150 to $280, and creosote or soot removal on a heavier flue runs $200 to $400. A Level 2 inspection with a camera and smoke test usually lands between $250 and $450. A stainless cap and flashing repair runs $300 to $650, and HeatShield or DuraFlex relining runs $1,800 to $4,500 depending on flue length and access. What moves the number is flue condition, how many units the shaft serves, and roof access; the written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Sunset Park
We also cover the neighborhoods around us, so you don’t have to hunt down a separate sweep. That includes Sunset Park and the surrounding blocks toward Borough Park, Kensington, Bay Ridge and Dyker Heights. Same inspection-first approach, same trade-grade materials, wherever the flue runs.
Serving Sunset Park, NY – Our Local Coverage Area
We serve Sunset Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Sunset Park
Because in much of 11220 the original coal-era shafts were built into the party walls between attached rowhouses, so the flue for one address often also serves the neighbor’s boiler. A smoke test on a windy day frequently reveals cross-drafting between units. A Level 2 inspection is the way to trace it. Call (833) 554-1032 for an exact quote.
Stainless is the better choice on a coastal Sunset Park roof. Galvanized caps eaten through by harbor humidity are one of the first things that fail here, while a stainless cap over correctly lapped flashing outlasts the roof. Call (833) 554-1032 to book an assessment.
No, flaking means the crown is breaking down and letting meltwater into the flue. Repeated freeze-thaw cycles spall old brick and mortar, and on a shared multi-unit flue that water travels. Getting it sealed early costs far less than the damage downstream. Call (833) 554-1032 for an exact quote.
You need a Level 2 inspection for a shared multi-unit flue in 11220. It uses a camera and a smoke test to check whether your shaft crosses into the neighboring boiler flue, which a Level 1 cannot reveal. Call (833) 554-1032 and we’ll set it up.
Third-degree creosote is glazed and hard, and a brush alone won’t remove it. A sweep assesses the layer first, then decides between standard brushing and a chemical treatment. Call (833) 554-1032 for an exact quote.
Ready to get your Sunset Park chimney sorted before the cold sets in? Call (833) 554-1032 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.