Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Borough Park?
In Borough Park, a standard chimney cap with installation typically runs $180-$550, while crown repair or rebuild usually costs $350-$1,800 depending on the damage. A full waterproof crown rebuild on a large masonry chimney sits at the top of that range. Most jobs are diagnosed with an inspection first, then priced in a written estimate before any work begins.
We handle both parts of the job, cap and crown, from the flue to the firebox, using trade-grade materials including Olympia Chimney, Gelco, Famco, and Copperfield. Our technicians have up to 9 years of experience. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
These ranges reflect what a cap or crown job typically runs in the Borough Park market. Every job is priced individually, and the written estimate you receive sets the final price.
| Line item | Typical 2026 range |
|---|---|
| Single-flue cap, stainless (supply and install) | $180-$350 |
| Multi-flue cap | $300-$550 |
| Crown crack sealing / minor repair | $350-$700 |
| Full crown rebuild with chimney flare and overhang | $1,200-$1,800 |
| Crown rebuild plus upper-course brick replacement | $1,600-$2,800 |
| Crown waterproofing (added to rebuild) | $150-$400 |
| Custom cap for an odd flue configuration | $450-$900 |
| Inspection to assess cap and crown condition | Free estimate |
What pushes a Borough Park job toward the higher end? Brick movement at the top of the chimney is the big one. Borough Park’s row houses and older detached homes share a lot of masonry, and the upper courses take the most weather year after year. When a crown has been cracked and letting water into the brick for a season or two, the repair stops being a crown job and becomes a crown-plus-brick job. A cap that fits a standard round flue is a straightforward purchase. A cap over two flues with an unusual footprint takes a custom fabrication.
The cost also depends on access. A chimney reached easily from a flat roof or a rear extension takes less setup than one that needs additional staging. We quote the access situation up front so there are no surprises.
What Affects Chimney Cap & Crown Pricing in Borough Park
- Number of flues. A single flue needs a single cap. A two-flue or three-flue chimney needs one cap sized to cover all of them, or a bank of individual caps. More flues, more material and more time on the roof.
- Crown condition. A hairline crack can be sealed. A crown that is spalling, missing its overhang, or has pulled away from the flue needs a rebuild. That is the difference between roughly $400 and roughly $1,500.
- Brick and mortar at the chimney top. Crown work and upper masonry go together. If the top courses are loose or the mortar joints are washed out, the crown won’t seal against a chimney that’s moving. We quote that brick work as part of the job so the crown has something solid to sit on.
- Chimney height and roof access. A chimney on a low flat roof is quick to reach. A tall stack above a steep roofline adds labor. Setup time is real cost.
- Material choice. A stock stainless cap is affordable. A copper cap with a custom footprint costs more up front and can last longer on the chimney. We install Copperfield and Olympia Chimney products, so we can talk through the trade-off honestly.
- Season of the year. Crown mortar and waterproofing behave differently in the cold. Work done in a freeze can be limited by what the material will cure properly in, which affects scheduling and labor planning.
Chimneys around Borough Park have to handle cold winters and hot summers, and that cycle is what cracks a lot of crowns. A masonry crown expands and contracts with the seasons. Once a crack opens, water gets in, freezes, and pushes it wider. Getting the crown seen early costs far less than fixing it after a winter.
Should You Repair the Crown or Rebuild It?
Repair a crown when the damage is a crack or localized spalling and the crown is still attached to the flue and still has its overhang; rebuild it when the crown is loose, missing its overhang, or the brick underneath has moved. Sealing a failing crown just delays the problem. Rebuilding a crown that only has a hairline crack wastes money.
The deciding factor is usually the overhang. A proper crown overhangs the chimney face so water drips clear of the brick. When that overhang is gone, or the crown has separated from the flue, water runs straight down into the masonry no matter how well you seal the surface.
We start with an inspection, not an upsell. A real inspection documents what is there: the crown shape, the flue condition, the cap, the brick at the top. You get the findings and a written estimate, and you decide. That is the sequence from the flue to the firebox, and it’s how we approach chimney cap & crown work on every home.
What Does a Chimney Cap Cost in Borough Park?
A chimney cap in Borough Park costs roughly $180-$350 for a standard single-flue stainless cap installed, and $300-$550 for a multi-flue cap. Custom or copper caps run $450-$900. The cap is the cheapest line item on this list and one of the most important, because it keeps water, animals, and debris out of the flue opening.
Cap choice comes down to flue configuration and budget. A stock cap fits a round or square single flue. A chimney with two or three flues needs a wider cap assembled as one unit or a set of individual caps on a custom frame. If you want the cap to shed water well and last, a stainless or copper model is the right call. We keep Olympia Chimney and Copperfield products in the mix because they hold up to the freeze-thaw cycle here.
How to Save on Chimney Cap & Crown
The single biggest saving is catching the crown before brick damage starts. A small crown repair in the $400-$700 range becomes a $1,200-$2,800 rebuild once the upper courses are wet and spalling. That gap is the reason we push an inspection-first approach rather than waiting for a leak to announce itself.
- Get the crown sealed early. Sealing a cracked crown before winter is cheap insurance against a rebuild the following year.
- Bundle the cap with the crown work. If the crown is already coming off for repair, adding a new cap in the same visit saves a second trip up the roof.
- Ask for the inspection up front. A free estimate on the crown and cap condition tells you what you’re actually facing before you budget for it.
- Waterproof the crown after the rebuild. A waterproofing coat on a fresh crown adds $150-$400 and can stretch the life of the mortar.
- Don’t skip the cap to save money. An uncapped flue takes on rain and nesting animals, which is a repair bill waiting to happen.
Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No fee for coming out, and the written estimate sets the price.
Can a Bad Crown Really Cost You More Later?
Yes, a neglected crown is one of the most expensive things on a chimney to ignore. A cracked crown lets water into the masonry, and water in masonry freezes, expands, and breaks the brick apart from the inside. Left long enough, it can reach the flue liner, the firebox, and the framing around the chimney.
That’s why a crown job is one of the cheapest services we do relative to what it prevents. Cap and crown work sits right at the top of the Chimney Sweep Borough Park service list for a reason: it’s the first line of defense for the whole chimney. We also handle the fireplace side, from the damper to the firebox, and we can reline a flue with DuraFlex flexible liner systems if the water damage has reached the liner.
Our vendors matter here. Gelco and Famco crown materials and masonry products are specified by chimney professionals for a reason: they hold up to weather. DuraFlex liner systems mean a reline stays in one company’s hands rather than getting passed to a second contractor. HeatShield application lets us resurface a damaged liner without a full tear-out in the right conditions. Trade-grade materials, properly installed, is the standard we hold to.
What Does the Job Actually Involve?
A crown rebuild starts with removing the old crown down to sound masonry. We form a new crown with the right slope and overhang so water sheds clear of the chimney face, then finish and waterproof it. A cap install starts with measuring the flue opening, matching the cap to it, and anchoring it so wind and weather don’t move it.
Both jobs are roof work at height, which is why we don’t recommend homeowners climb up to handle them. A wet or icy roof, a steep pitch, and a masonry job are a poor combination for anyone without the right equipment and experience. This is trained-professional work, and we say so plainly.
One crew, start to finish: the same team that does the crown rebuild handles the cap and the masonry. No handoff to a second contractor. We also offer a formal chimney inspection as a standalone service, so if you only want to know the condition of your cap and crown, we can document it without bundling anything else in.
What Else Should You Check While the Chimney Is Open?
While we’re at the top of the chimney, it makes sense to look at the rest of it. The flue, the damper, the firebox, and the smoke chamber all work together, and a water problem at the crown often shows up further down. Fireplace repair, damper work, and liner assessment are all part of the scope we cover.
If the chimney has a wood-burning fireplace or a gas insert, the cap and crown work fits into a broader maintenance rhythm. A yearly sweep keeps creosote in check, and an inspection keeps you ahead of the crown. This is the same approach we take on chimney repair and fireplace repair jobs around Borough Park.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Borough Park?
A chimney cap in Borough Park typically costs $180-$350 for a standard single-flue stainless cap installed, $300-$550 for a multi-flue cap, and $450-$900 for a custom or copper cap. Call (833) 554-1032 for an exact quote on your flue configuration; estimates are free.
How much does chimney crown repair cost in Borough Park?
Chimney crown repair in Borough Park runs roughly $350-$700 for crack sealing or a minor repair, and $1,200-$1,800 for a full crown rebuild with a proper overhang. If upper brick replacement is needed, expect $1,600-$2,800. Call (833) 554-1032 for a written estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is still attached and only cracked; a rebuild costs more up front but is the right call when the crown is loose or has lost its overhang. A $400-$700 repair beats a $1,200-$1,800 rebuild, but only if the crown can actually be saved. We’ll tell you which one you’re facing. Call (833) 554-1032 for a free estimate.
Can you come today for a cap or crown estimate?
Same-day service is often possible for a cap or crown estimate in Borough Park. Call (833) 554-1032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Do I need a permit for chimney crown work in Borough Park?
Most chimney crown work and cap installation doesn’t require a permit, but rules for exterior masonry vary by building type and borough, so it’s worth confirming with the NYC Department of Buildings if you’re unsure. Call (833) 554-1032 and we’ll walk through the scope so you know what the job involves before anything starts.
Why Choose a Specialist for Cap and Crown Work
Cap and crown work is a small part of the chimney, but it’s a big part of what keeps the chimney working. We handle it as a dedicated service, not as a side job tacked onto a general repair call. Our inventory runs on trade-grade brands, and our technicians have up to 9 years of experience with the masonry and flue conditions common in Borough Park’s older housing stock.
We offer the full arc from sweeping and inspection through cap and crown work, chimney repair, and fireplace repair, and we use DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield products. From the flue to the firebox, one crew handles it. If you want the cap and crown checked before the cold season, that’s what we’re here for.
Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. On-Site in 60 Minutes.
Written by the team at Chimney Sweep Borough Park.
Pricing reflects the Borough Park market as of 2026. Chimney Sweep Borough Park offers free estimates – call (833) 554-1032.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Nicole Ackerman"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Lisa Anderson"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Sana Patel