G

Gelco Chimney Cleaning Service in Borough Park, NY

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Borough Park Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco chimney cleaning, repair and installation service in Borough Park, NY. What sets our Gelco work apart is hardware-level familiarity: we know how Gelco caps, top-sealing dampers and glass door sets fail, which fasteners seize, and how to sweep a flue without destroying the cap mounted over it. Our technicians have up to 9 years of experience with trade-grade chimney components, and we carry quality parts that fit Gelco equipment.

Call (833) 554-1032

One thing to state plainly up front: Chimney Sweep Borough Park is an independent service provider. We’re not affiliated with, authorized by, or endorsed by Gelco. Our knowledge of these products comes from repeated hands-on work with them in Borough Park homes, not from the factory. If you’ve got a Gelco cap that won’t lift, a top-sealing damper that never quite closes, or a rusted-out screen letting starlings into the flue, that’s exactly the kind of call we handle. Reach us at (833) 554-1032.

Why Trust Chimney Sweep Borough Park for Your Gelco Chimney Cleaning?

Good chimney work starts with knowing what’s hanging on top of the flue. On a Gelco-equipped chimney, the sweep has to remove or work around a specific cap assembly before any brush goes down. Caps mounted with bolt-on legs and set screws that have spent a decade in New York weather are a different job than a simple pull-off lid. When set screws seize, applying force in the wrong place bends the leg or tears the crown flashing. Our technicians recognize that pattern quickly and take the hardware apart the safe way, whether that means penetrating oil and patience or cutting a seized bolt free and replacing it with anti-seize hardware so the next sweep goes smoothly.

We work with quality parts sourced to fit Gelco equipment. We don’t claim to stock genuine Gelco parts or to act as a Gelco dealer. What we do is match the right cap, damper or door hardware to what’s already on your Borough Park chimney, install it correctly, and leave the assembly serviceable. That approach protects the components you own, keeps the chimney working the way it was designed to, and avoids the problem of patching a failing unit twice. The local pro we connect you with is licensed and insured as their state requires, and nothing gets recommended without photo evidence you can review yourself.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Borough Park

Gelco hardware is durable, but none of it lasts forever in a borough that swings from humid summers to freeze-thaw winters. Here’s what we see most often on Gelco components, and why it happens:

  • Cap mounting legs and set screws seize. Stainless legs bolted to the crown take years of moisture and thermal cycling. The set screws rust into the threads, and the cap can no longer be lifted for sweeping without cutting hardware. We free or cut the fasteners and reinstall with anti-seize so the next cleaning doesn’t turn into a demolition job.
  • Top-sealing damper gaskets harden and linkages stick. The gasket that should form a seal around the seal plate dries out, and the cable and spring linkage binds against the frame. The result is a flue that stays partly open or fails to close against downdrafts. Cold air pours into the living room, and smoke can roll back on start-up instead of drafting up.
  • Cap screens rust through at the mesh crimp. On older Gelco units, the sheet-metal screen is where corrosion starts. Once the mesh rusts through at the crimp, the cap stops doing the job it was installed for, and birds, squirrels and debris find their way straight into the flue.
  • Galvanic corrosion at the flashing edge. Where a stainless Gelco cap meets aluminum or painted flashing on the crown edge, dissimilar metals react. That corrosion accelerates spalling of the crown right under the cap footprint, which is a masonry problem hiding in plain sight.
  • Undersized or offset hardware on older flues. A cap or damper that was sized for an earlier appliance doesn’t always suit the current flue setup. When hardware sits off-center or undersized, it lets weather in and makes sweeping harder. We measure before we recommend anything.
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 554-1032

Gelco Parts & Our Repair-vs-Replace Approach

When a Gelco cap, damper or door set is otherwise sound, genuine hardware is often worth ordering. Aftermarket stainless caps frequently have thinner mesh and shorter mounting legs than the original, and that matters on a wind-driven chimney in Borough Park. So the first question isn’t “what can we sell you” but “what’s actually wrong here.”

Corrosion changes the answer. Once rust has eaten through the mounting legs or the damper frame has warped past sealing, replacement usually costs less than fabricating a repair, and we’ll say so directly instead of patching a failing unit a second time. You get the diagnosis, the photos, and a written estimate for either path, and the estimate sets the final price. Call (833) 554-1032 to get a real assessment of what your Gelco hardware needs.

Our Gelco Service Process – Step by Step

  1. 1
    Inspection first. We inspect the cap assembly, mounting hardware, crown edge and damper before any cleaning begins. On a Gelco-equipped flue this means checking whether the cap can be removed intact and whether the set screws will cooperate. Photo documentation goes with the findings.
  2. 2
    Diagnosis and written estimate. You get a plain explanation of what we found and what it will take to fix it, with the price set per job by the written estimate.
  3. 3
    Repair or install. Gasket and linkage service on a sound top-sealing damper frame, a new cap set with anti-seize hardware, or a replacement assembly when the original is past saving. Sweeping follows once the flue is accessible.
  4. 4
    Test. We open and close the damper, confirm the seal, check draft, and make sure the cap sits square on the crown.
  5. 5
    Documentation and warranty. You get the inspection record and clear terms on the parts and labor we provided, so the next service call has a paper trail.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 554-1032

Gelco Products We Service & Install in Borough Park

We service and install the Gelco hardware found on Borough Park chimneys: stainless multi-flue cap assemblies, single-flue stainless caps with bolt-on mounting legs, top-sealing damper units, and fireplace glass door and screen sets. Cap replacement and cap installation are the most common jobs, since that’s where weather does its damage first. Damper repair comes a close second, especially on top-sealing units whose gaskets have dried out. If your Gelco hardware is one of these and it isn’t working as it should, we’ll inspect it and tell you honestly whether it can be serviced or needs replacing.

We Also Service These Brands

Chimney Sweep Borough Park isn’t tied to a single brand. Alongside Gelco, we work with DuraFlex flexible liner systems and HeatShield liner resurfacing, plus Olympia Chimney, Famco and Copperfield components. That range means we can handle a chimney that mixes brands, which is common on Borough Park rowhouses where a liner was added decades after the original cap went on.

FAQs – Gelco Chimney Cleaning Service in Borough Park

Book Your Gelco Service in Borough Park, NY

If you’ve got Gelco hardware on your chimney and it needs cleaning, servicing or replacing, we’ll inspect it first and tell you honestly what it needs. Trade-grade parts, properly installed, from the flue to the firebox. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Borough Park.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (833) 554-1032
Local Service Coverage
Chimney Sweep Borough ParkChimney Sweep Sunset ParkChimney Sweep KensingtonChimney Sweep Dyker HeightsChimney Sweep BensonhurstChimney Sweep MidwoodChimney Sweep Bay RidgeChimney Sweep FlatbushChimney Sweep FlatlandsChimney Sweep GravesendChimney Sweep Park SlopeChimney Sweep Carroll GardensChimney Sweep Red HookChimney Sweep Sheepshead BayChimney Sweep East FlatbushChimney Sweep Crown HeightsChimney Cap & Crown Borough ParkChimney Cap & Crown Sunset ParkChimney Cap & Crown KensingtonChimney Cap & Crown Dyker HeightsChimney Cap & Crown BensonhurstChimney Cap & Crown MidwoodChimney Cap & Crown Bay RidgeChimney Cap & Crown FlatbushChimney Cap & Crown FlatlandsChimney Cap & Crown GravesendChimney Cap & Crown Park SlopeChimney Cap & Crown Carroll GardensChimney Cap & Crown Red HookChimney Cap & Crown Sheepshead BayChimney Cap & Crown East FlatbushChimney Cap & Crown Crown HeightsChimney Repair Borough ParkChimney Repair Sunset ParkChimney Repair KensingtonChimney Repair Dyker HeightsChimney Repair BensonhurstChimney Repair MidwoodChimney Repair Bay RidgeChimney Repair FlatbushChimney Repair FlatlandsChimney Repair GravesendChimney Repair Park SlopeChimney Repair Carroll GardensChimney Repair Red HookChimney Repair Sheepshead BayChimney Repair East FlatbushChimney Repair Crown HeightsFireplace Repair Borough ParkFireplace Repair Sunset ParkFireplace Repair KensingtonFireplace Repair Dyker HeightsFireplace Repair BensonhurstFireplace Repair MidwoodFireplace Repair Bay RidgeFireplace Repair FlatbushFireplace Repair FlatlandsFireplace Repair GravesendFireplace Repair Park SlopeFireplace Repair Carroll GardensFireplace Repair Red HookFireplace Repair Sheepshead BayFireplace Repair East FlatbushFireplace Repair Crown HeightsChimney Inspection Borough ParkChimney Inspection Sunset ParkChimney Inspection KensingtonChimney Inspection Dyker HeightsChimney Inspection BensonhurstChimney Inspection MidwoodChimney Inspection Bay RidgeChimney Inspection FlatbushChimney Inspection FlatlandsChimney Inspection GravesendChimney Inspection Park SlopeChimney Inspection Carroll GardensChimney Inspection Red HookChimney Inspection Sheepshead BayChimney Inspection East FlatbushChimney Inspection Crown Heights

Request a Free Estimate in Borough Park

Tell us what you need - Chimney Sweep Borough Park responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7