Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Midwood, NY
We provide independent DuraFlex service across Midwood, and our work here looks different from a standard sweep because so many of these chimneys vent gas equipment rather than wood fires. DuraFlex is a flexible stainless steel chimney liner, and in Midwood’s older brick houses the liner is usually the part that decides whether a flue is safe. We’re an independent shop, not affiliated with or authorized by the manufacturer, which means our recommendations follow what your chimney actually needs. Call (833) 554-1032 for a free estimate.
Why Midwood Residents Choose Us for DuraFlex Service
We know DuraFlex liners in Midwood because we work on them constantly in the housing stock here. The installation quirks that generic sweeps miss, like how a flexible liner sits against a rough clay tile and where it tends to abrade over the years, are the things we check first.
Our technicians have up to 9 years of experience, and we use recognized trade-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. When a connector or cap needs replacing we fit quality parts that match your liner, and we tell you plainly when a repair will do and when it won’t.
Inspection first, recommendation second. We start every DuraFlex job in Midwood with a Level 2 Inspection, and nothing gets recommended without camera footage you can see for yourself. Scheduling is straightforward: we answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Midwood
DuraFlex liners fail in patterns, and in Midwood the local housing and weather push certain ones to the front.
- Corrosion at the liner-to-appliance connector. High-efficiency gas boilers and water heaters send acidic flue gases through the liner, and the connector is where condensate collects. In Midwood’s gas-converted flues this is the first spot we look, and it’s often caught before the liner itself is affected.
- Kinked or abraded liner against cracked clay tile. Freeze-thaw cycles crack and spall the original clay tiles these houses were built with. A flexible liner pressed against broken tile edges can kink during sweeping or wear thin over time, so we examine the tile around the liner before we run a brush.
- Missing or damaged top plate and cap. Many Midwood chimneys have no cap at all, which lets nor’easter rain straight down the flue. Water reaching a stainless liner is a rust problem waiting to happen, and a proper cap install is one of the simplest fixes we make.
- Liner separation at joints. On semidetached blocks the chimneys share a party wall, and movement from freeze-thaw can work joints loose. A gap at a joint is a flue gas leak, not a cosmetic issue.
- Water intrusion through the crown. Humid summers and coastal winters crack mortar crowns, and once water gets into the masonry it reaches the liner from the outside. Chimney waterproofing belongs in the same conversation as the sweep.
DuraFlex Service in Midwood: What Local Conditions Mean for Your Equipment
The fact that shapes nearly every DuraFlex job in Midwood is the housing itself. Most of this neighborhood is 1920s to 1950s two- and three-story brick semidetached and detached houses, and on those semidetached blocks rowhouse neighbors often share a party wall and adjacent chimney stacks. That means a cracked flue or a missing cap on one side can affect the other side. Flue gases and moisture don’t respect the property line. A two-flue inspection is standard here, not optional, and we routinely check both flues even when only one is in use.
Add the coastal New York winters, with freeze-thaw cycles that crack mortar crowns and clay tiles, plus humid summers and nor’easters driving water intrusion, and you get chimneys that need eyes on them regularly. On a Midwood semidetached block, a DuraFlex liner problem on one side is worth checking on the other before it becomes two problems. Many of these original clay tile flues now vent gas boilers and water heaters rather than wood, so the sweep is really a venting inspection.
DuraFlex Models & Products We Service in Midwood
We service and install the full range of DuraFlex flexible stainless steel liner types: the smooth wall SW liner, the insulated Pro liner, and the standard round corrugated liner, along with DuraFlex cap and crown components. Each has its own cleaning and inspection considerations, and we match our approach to what’s actually in your flue.
When a part needs replacing, we use OEM DuraFlex components for connectors and caps when they’re available, and high-quality aftermarket stainless parts for non-critical sections when they aren’t. We recommend repair over replacement when the liner is under 15 years old and the damage is localized. A typical DuraFlex chimney cleaning in Midwood starts with a Level 2 Inspection that often reveals a missing cap and cracked clay tiles around the liner. The technician sweeps the flue, notes any corrosion at the appliance connector, and recommends a new cap and waterproofing to stop further water damage from nor’easters and freeze-thaw cycles.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Midwood
Pricing for DuraFlex work in Midwood is set per job by the written estimate, and the estimate itself is free. What drives cost is the scope: a straightforward sweep plus inspection sits at the low end, while a cap install, crown repair, or waterproofing adds to it. If the inspection turns up a liner issue, we show you the camera footage and quote repair and replacement separately so you can compare.
| Service | Typical Cost Range (estimate) |
|---|---|
| Chimney sweep with Level 2 Inspection | Call for a free written estimate |
| Cap installation | Call for a free written estimate |
| Crown repair and chimney waterproofing | Call for a free written estimate |
| DuraFlex liner repair or relining | Call for a free written estimate |
The written estimate sets the final price, so there’s no surprise when the work is done. Call (833) 554-1032 for an exact quote – estimates are free.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Midwood
No. Chimney Sweep Borough Park is an independent DuraFlex service provider, not manufacturer-affiliated or authorized. We service and install DuraFlex liner systems as an independent shop and recommend what your chimney needs.
We use OEM DuraFlex components for connectors and caps when they’re available, and high-quality aftermarket stainless parts for non-critical sections when they aren’t. Either way, the part fits the liner and meets the same standard.
For a gas-venting flue, an annual inspection is the practical baseline, and we check the connector for corrosion each visit. Many Midwood flues vent boilers and water heaters, so the sweep doubles as a venting inspection. Call (833) 554-1032 to book.
Look for water stains, rust at the appliance connector, a missing cap, or cracked clay tiles visible around the liner. In pre-war brick houses those are the usual first warnings. A Level 2 Inspection confirms what’s going on before any work is quoted.
Yes, with the right preparation. Spalling tile edges can abrade a flexible liner, so we address the tile surface first. The Level 2 Inspection shows the condition and we plan the install around it.
Because adjacent chimneys often share a party wall here, and a cracked flue or missing cap on one side can affect the other. Flue gases and moisture migrate between them. Checking both is how we catch problems that would otherwise spread.
A properly fitted stainless cap that keeps nor’easter rain out while allowing the flue to vent. Water intrusion is the main threat to a stainless liner here, so the cap and top plate matter more than most homeowners expect.
Service Areas Near Midwood
We serve Midwood and the surrounding neighborhoods, including Borough Park, Sunset Park, Kensington, Dyker Heights, and Bensonhurst. The same party-wall chimney issues come up across these blocks, and we handle DuraFlex work throughout. If you’re just outside Midwood, call and we’ll confirm coverage.
Book Your DuraFlex Service in Midwood Today
Call (833) 554-1032 for a free estimate on your DuraFlex chimney cleaning in Midwood. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Every job starts with a Level 2 Inspection and camera footage you can see for yourself.
Written by the team at Chimney Sweep Borough Park.