Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Borough Park Homeowners
Chimney repair in Borough Park usually starts with something small: a hairline crack in the mortar, a brick that flakes when you touch it, a stain on the ceiling near the flue. Those small things turn into expensive problems when water gets behind the brick and freezes. Our technicians have up to 9 years of experience diagnosing exactly that kind of damage, and we work inspection-first so you know what’s wrong before anyone quotes a repair. We handle the full arc of the work ourselves, from chimney sweep Borough Park and inspection through masonry repair and relining, using trade-grade materials like Gelco and HeatShield. Same-day repair is often possible when you call early. Call (833) 554-1032. We answer 24/7.
What Our Chimney Repair Service Includes
Chimney damage in this part of Brooklyn rarely stays in one place. A failed crown lets water into the masonry, the masonry cracks, the flashing pulls away from the roofline, and the flue starts taking on moisture too. That’s why we scope the whole chimney rather than patching the one spot you noticed. From the flue to the firebox, here’s what the work covers.
Mortar Repointing
Repointing means grinding out deteriorated mortar joints and packing in fresh mortar that bonds properly to the brick. You need it when joints have receded or turned to powder, which lets water sit in the wall. We match the mortar mix to the existing brick so the repair moves with the chimney instead of cracking away from it. Doing this before the brick itself fails is what keeps a repointing job from turning into a rebuild.

Spalling Brick Repair
Spalling is when the face of a brick flakes off or pops away, usually after repeated freeze-thaw cycles have driven moisture into the masonry. Left alone, the brick keeps shedding and the wall loses structural thickness. We cut out the failed units and set replacements with a mortar that lets the wall breathe. Where the damage is surface-level and widespread, HeatShield resurfacing can restore the flue rather than require a full tear-out.

Chimney Waterproofing
Waterproofing is a vapor-permeable coating applied to the exterior masonry to keep rain out while letting trapped moisture escape. You want it after any masonry repair, and especially on older chimneys that absorb water readily. We apply it as the finishing step once repointing and brick work have cured, so the coating seals a sound wall rather than locking in a problem.

Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof, and it’s the most common source of leaks we find. When it’s rusted through, lifted, or was never stepped into the shingles correctly, water runs straight down the chimney chase. We reset or replace the flashing and seal the counterflashing at the masonry so the roofline joint is watertight.
Chimney Rebuilding
When damage has gone past the surface, the top of the chimney gets rebuilt: the crown, the upper courses of brick, and any failed flue tile. You need this when the chimney is leaning, the crown is crumbling, or whole sections of brick have loosened. We rebuild to the original footprint and cap it with a proper overhanging crown so water sheds away from the masonry instead of into it.
Tuckpointing
Tuckpointing is the finer version of repointing, where the joint is cut back and finished with a contrasting mortar for a cleaner, more defined look. Homeowners ask for it when the chimney is visible from the street or the garden and they want the repair to read as intentional rather than patched. The prep work is the same as repointing; the difference is in how the joint is finished. We’ll tell you plainly whether your chimney needs it or whether standard repointing will do the job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We install and repair with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the names certified chimney professionals specify. Gelco relates to our crown and masonry work, where a properly formed crown is what keeps water off the chimney in the first place. Olympia Chimney components come into play on cap and flue work, and we know where those assemblies wear out first. When we open up a chimney, we can tell you what’s in there and what condition it’s in.
HeatShield is the one worth calling out. It’s a resurfacing system for the flue liner, applied in place, and it lets us restore a liner that’s cracked or pitted without tearing the chimney apart. Not every chimney company can offer that, and it changes the repair options on older Borough Park homes where a full reline isn’t necessary yet. DuraFlex flexible liner systems mean we can also handle a complete reline in-house, so the job doesn’t get handed off to a second contractor midway. Whether you have Gelco, Famco, Copperfield, or any other make, we can help.
Signs You Need Chimney Repair Right Now
Some chimney problems announce themselves. Others sit quietly until the first cold snap. Here’s what to look for on your own chimney in Borough Park, and why each one matters.
- Crumbling or missing mortar between the bricks. If joints have receded or you can dig out mortar with a screwdriver, water is getting into the wall. Mortar is the chimney’s first defense, and once it’s gone the brick starts taking the damage instead.
- White chalky staining on the brick. That powdery residue is a sign moisture is moving through the masonry and pushing salts out. It usually means the chimney has been absorbing water for a while and waterproofing is overdue.
- Water stains on the ceiling or walls near the chimney. Rust or brown rings inside the house point to a flashing leak or a failed crown above. Catching it early keeps the repair to metal and masonry instead of framing and drywall.
- A chimney that leans or has visible cracks running through the brick. Structural movement needs eyes on it quickly. A leaning chimney isn’t something to monitor for another season, especially with the weight of a top-heavy winter ahead.
- Loose or missing chimney cap, or a crown that’s cracked and flaking. The cap and crown are what shed water off the top of the chimney. When either fails, everything below it starts absorbing the rain.
Our Chimney Repair Process – Step by Step
- 1
Book the sweep and inspection. Every repair job starts with a formal chimney inspection, not a quick walkaround. We assess the flue, the firebox, the crown, the flashing, and the exterior masonry, and we document what we find with photos and a camera inspection inside the flue.
- 2
Show you the evidence. You see the same images we do. If the flue is sound and only the crown needs work, we say so. If something can safely wait until next season, we’ll tell you that as well. Nothing gets recommended without evidence you can look at yourself.
- 3
Write the estimate before any work starts. The written estimate sets the price. It lists the specific repairs, the materials, and the brands involved, so there are no surprises when the job is done. The estimate is free.
- 4
Do the repair with trade-grade materials. Repointing, brick replacement, flashing, crown work, or relining with DuraFlex or HeatShield. One crew handles the job start to finish, so you’re not coordinating between a mason and a chimney company.
- 5
Final check and walkthrough. We verify the repair holds, confirm the flue is clear, and walk you through what was done. Any documentation from the inspection goes to you, which matters if you ever sell the house or need it for your insurer.
If you’d like the repair scoped by a specialist rather than a general contractor, our chimney repair page covers the full service arc, and you can always call us to talk through what you’re seeing.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Borough Park?
Chimney repair in Borough Park depends heavily on where the damage sits: surface masonry is one price tier, structural rebuilding is another, and relining sits in between. Typical estimates for the common repairs:
| Repair | Typical Estimated Range | What Drives the Price |
|---|---|---|
| Mortar repointing | $350 – $1,200 | Height of the chimney, number of joints, access to the roofline |
| Spalling brick replacement | $400 – $1,500 | How many bricks are failing, whether the flue tile is affected |
| Chimney waterproofing | $250 – $700 | Surface area of the exterior masonry, prep work needed |
| Flashing repair | $300 – $900 | Whether the flashing can be reset or must be fully replaced |
| Chimney rebuilding | $1,800 – $6,000+ | How far down the damage goes, crown and flue tile replacement |
| Liner resurfacing with HeatShield | $1,200 – $2,800 | Flue dimensions, condition of the existing liner |
These are estimates, not quotes. The written estimate sets the final price once we’ve seen the chimney. What affects the number most is access: a chimney on a steep roofline or tight setback takes more setup than one you can reach safely, and that shows up in the labor. To avoid overpaying, ask for the inspection findings in writing and get the scope itemized rather than a single lump figure. Our free estimate includes the inspection documentation, so you can see exactly why the price is what it is, and the local pro we connect you with is licensed and insured as the state requires.
Chimney Repair Near Borough Park – Our Service Area
We cover chimney repair across Borough Park and the neighborhoods around it, including Dyker Heights, Bensonhurst, Midwood, Flatbush, Kensington, and Sunset Park. Dispatch runs Sunday through Friday, 7am to 7pm, so a call in the morning usually means a visit the same day. Our chimney repair work in Sunset Park follows the same inspection-first process, and the same applies if you’re in Kensington or anywhere nearby. If your chimney is leaking, cracked, or you simply don’t know what condition it’s in, give us a call and we’ll get you booked.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Borough Park
Chimney repair covers any work that restores the structure or the flue to safe, code-compliant condition, from repointing mortar joints and replacing spalled brick to rebuilding a failed crown or relining the flue. It’s distinct from sweeping, which removes creosote and debris. If the inspection shows the chimney is structurally sound and only dirty, you need a sweep, not a repair, and we’ll tell you that. Call (833) 554-1032 for an exact quote.
Most masonry repairs, like repointing or replacing a section of spalled brick, finish within a day. Waterproofing is a single-day job once the masonry has cured. A full rebuild or reline is usually a multi-day project depending on how much is being replaced and the weather. We give you the timeline in the written estimate so you can plan around it.
Typical estimates in Borough Park run from around $250 for waterproofing up to $6,000 or more for a full rebuild. Repointing and brick repair usually land between $350 and $1,500, and flashing repair between $300 and $900. The written estimate sets the final price after inspection, and the estimate itself is free.
Yes. We install and repair Gelco crown materials and Olympia Chimney caps and flue components, and we know where those assemblies tend to wear first. We also work with DuraFlex liner systems, HeatShield resurfacing, Famco, and Copperfield. If your chimney has a different make, we can still assess it.
Same-day repair is often possible when you call early in the day. We answer 24/7, and dispatch runs Sunday through Friday, 7am to 7pm. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 554-1032 to check availability and get an exact quote.
Yes, we stand behind the work we do. The warranty terms are spelled out in the written estimate so you know what’s covered before you commit. Masonry work and liner installations carry different coverage, and we’ll explain the difference clearly. If something isn’t right after the job, call us and we’ll make it right.
Clear access to the fireplace and the area around it, and make sure we can get to the roof or the exterior wall where the chimney sits. Move anything fragile away from the hearth and, if you can, note any leaks or stains you’ve seen so we can look at those spots specifically. Beyond that, you don’t need to do anything. We bring the tools and drop cloths.
Going without regular service is the reason most of these repairs come up at all. If you’re not sure when your chimney was last checked, start with a sweep and let the inspection tell you what’s needed.
Schedule Your Chimney Repair Service in Borough Park Today
A cracked crown or a failing mortar joint is a small fix now and a much bigger one after a hard winter. Call (833) 554-1032 to book an inspection and a free written estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing is recommended without evidence you can see, and if the work can safely wait, we’ll tell you.
Written by the team at Chimney Sweep Borough Park.