Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Borough Park Homeowners
Most chimney problems in Borough Park announce themselves quietly: a faint draft that wasn’t there last winter, a stain spreading on the ceiling above the firebox, a smoke smell that lingers after the fire is out. A proper inspection finds those problems before they turn into a liner replacement or a masonry repair. Our technicians have up to 9 years of experience, and we treat inspection as its own service, not a quick walkthrough tacked onto a sweep. We answer 24/7. Fast dispatch, 7am-7pm. Call (833) 554-1032 to book a documented assessment of your flue and firebox.
What Our Chimney Inspection Service Includes
Every chimney in this part of Brooklyn was built for a specific appliance, and the inspection you need depends on what’s connected to the flue and what’s changing in the house. We offer six distinct levels of assessment so you’re not paying for a deeper look than the situation calls for.
Level 1 Inspection
A Level 1 inspection covers the readily accessible portions of the chimney and its connections: the firebox, the damper, the visible sections of flue, and the exterior at ground level. It’s the right choice for a chimney that’s in continued service with the same appliance and no changes to the system. We perform it with a flashlight and basic hand tools, and we document what we find in writing rather than leaving you with a verbal summary.
Level 2 Inspection
A Level 2 inspection goes further into concealed areas, including the attic, crawl spaces, and any accessible portions of the flue interior, and it’s the standard when a home changes hands, an appliance is replaced, or a chimney has been through a chimney fire or a significant weather event. We use a chimney camera for the flue sweep and photograph what we see. This is the level most real estate transactions in Borough Park require, and it’s the one we recommend whenever the history of the chimney is unknown.
Level 3 Inspection
A Level 3 inspection is diagnostic work that requires access to areas that would otherwise stay closed off, such as removing a section of wall, opening a cricket, or accessing a concealed flue chase. It’s only recommended when a Level 1 or Level 2 has already turned up a specific concern that can’t be resolved without that access. We explain exactly what needs opening and why before any work begins, and we put it in the estimate.
Camera Inspection
Camera inspection puts a video scope down the flue so we can see cracks, gaps in the liner joints, and the condition of the smoke chamber without guessing. It’s the tool that separates a real diagnosis from an assumption, and it’s how we confirm whether a liner is sound or failing. We show you the footage and still images as part of the report so you can see the same thing we’re seeing.
Flue Inspection
A flue inspection focuses specifically on the passage the smoke and gases travel through: the liner, the joints, the smoke chamber, and the termination at the top. It’s the right service when you’ve had smoke spillage, a draft problem, or a prior sweep that couldn’t reach the full length of the flue. We check the flue’s size relative to the appliance as part of the assessment, since an undersized flue is a common cause of poor draft in older homes.
Real Estate Inspection
A real estate inspection is a Level 2 assessment prepared for a sale, refinance, or insurance requirement, with a written report formatted for the parties who need it. We document the condition of the chimney, the flue, and the connected appliance, and we note anything that would need repair. If a buyer’s lender or insurer has a specific format in mind, tell us before we arrive and we’ll match it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We inspect and work with the trade-grade components that show up in well-built chimneys, including DuraFlex liner systems, HeatShield resurfacing products, Gelco caps, and Olympia Chimney components. When we inspect a DuraFlex installation, we know where the liner joints tend to wear and how to read the condition of a flexible liner from the camera footage. On HeatShield-restored flues, we know what a properly cured surface should look like and where a failing application shows its first signs.
Gelco caps and Olympia Chimney terminations get the same attention, because a cap that’s rusted through or a top plate that’s pulled loose lets water and animals into the flue long before you’d notice from inside the house. We don’t hand off any part of the inspection to a second contractor; one crew handles the assessment, and if repair is needed, that same crew handles it. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Chimney Inspection Right Now
- Smoke spilling into the room. Smoke that rolls out of the firebox instead of going up the flue usually points to a blocked flue, a draft problem, or a failing liner. It’s worth checking before your next fire, because the same blockage that sends smoke into the room can send carbon monoxide there too.
- Water stains or a damp smell near the chimney. Staining on the ceiling or wall near the chimney, or a musty smell that shows up after rain, often means the crown, flashing, or cap has failed. Water in the flue damages the liner and the masonry behind it, and it gets worse each season it’s left alone.
- A chimney fire you know about. Even a small chimney fire can crack a liner, and the damage isn’t always visible from the firebox. A Level 2 inspection after any chimney fire is the standard, not an optional extra.
- You’ve never had it inspected. If you’ve moved into a home in Borough Park and don’t know when the chimney was last looked at, a Level 2 inspection gives you a baseline. From there, annual Level 1 checks keep the record current.
- You’re buying, selling, or refinancing. Lenders and insurers often want a documented inspection before they’ll sign off on a home with a wood-burning fireplace or an oil flue. A written report from a Level 2 inspection covers that need.
Our Chimney Inspection Process – Step by Step
- 1
We talk through the history first. Before we touch anything, we ask what’s connected to the flue, whether the appliance has changed, and whether there’s been a chimney fire, a roof repair, or water intrusion. That conversation decides which level of inspection makes sense for your chimney.
- 2
We assess the accessible system. We check the firebox, damper, and visible flue sections, then inspect the exterior at ground level and from the roof as needed. Every observation goes into the report, including the ones that don’t require work.
- 3
We run the camera. For a Level 2 or camera inspection, we feed a video scope down the flue and record what it sees. This is where we find the joint gaps and cracks that a flashlight can’t reach, and it’s the evidence behind any recommendation we make.
- 4
We show you what we found. You see the footage and photos, and we explain what each item means and how urgent it is. If something can safely wait, we say so.
- 5
You get a written report and estimate. The report documents the condition of the chimney and flue, and the estimate prices any recommended repair per job. Nothing is added later without your sign-off.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Borough Park?
A typical Level 1 chimney inspection in Borough Park runs $150 – $250 depending on access and how much of the flue is visible. A Level 2 inspection, which includes the camera work and the written report most real estate and insurance situations require, typically runs $250 – $450. A Level 3 inspection that requires opening a wall or accessing a concealed chase is priced per job by written estimate, because the access work varies so much from one house to the next.
What affects the price is mostly access: a chimney on a steep roofline, a flue that’s hard to reach from the firebox, or a home where the attic or crawl space is difficult to get into will take longer. You avoid overpaying by matching the inspection level to the situation rather than defaulting to the deepest option, and by asking for the report in writing so you can see exactly what was checked.
| Service | Typical Estimated Range |
|---|---|
| Level 1 inspection | $150 – $250 |
| Level 2 inspection (with camera and report) | $250 – $450 |
| Level 3 inspection | Priced per job |
| Camera or flue inspection add-on | Included in Level 2 |
Our estimate is free, and the written estimate sets the final price. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can wait.
Chimney Inspection Near Borough Park – Our Service Area
We inspect chimneys throughout Borough Park and the surrounding neighborhoods, including Dyker Heights, Bensonhurst, Midwood, and Kensington. If you’re in Bay Ridge, Flatbush, Flatlands, Gravesend, Park Slope, or Carroll Gardens, we cover that ground too. For homeowners in nearby communities who want the same standard of assessment, our chimney inspection page covers Sunset Park. If you need the full sweep and inspection booked together, start with a Chimney Sweep Borough Park and we’ll schedule both in one visit.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Borough Park
A chimney inspection is a documented assessment of your chimney’s condition, including the firebox, damper, flue liner, and exterior components. It’s a diagnostic service, separate from a sweep, and its purpose is to find problems like cracks, blockages, or failing joints before they become a fire or carbon monoxide hazard. We put everything we find in writing, with photos and camera footage you can review.
A Level 1 inspection usually takes 30 to 45 minutes, while a Level 2 with camera work typically runs 60 to 90 minutes. Level 3 work depends on how much access is needed and is scheduled with that in mind. We’ll tell you the expected time when you book, so you can plan your day around it.
A Level 1 inspection typically runs $150 – $250 in Borough Park, and a Level 2 with camera and written report runs $250 – $450. Level 3 work is priced per job by written estimate because access varies so much. Call (833) 554-1032 for an exact quote – estimates are free, and the written estimate sets the final price.
Yes. We inspect both HeatShield-restored flues and DuraFlex flexible liner installations, and we know where each type tends to wear. Our camera work lets us read the condition of a flexible liner’s joints and the surface of a HeatShield application without guessing. We also work with Gelco caps and Olympia Chimney components, so the whole system gets checked, not just the flue.
Same-day inspection is often possible when you call early. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 554-1032 and we’ll find you the earliest slot that works.
Our inspection reports stand behind the assessment itself, and any repair we recommend comes with the written estimate that sets the scope and price. If a repair is needed, we handle it with the same crew that did the inspection, so there’s no handoff. Ask about the specific work at the time of booking and we’ll put the details in writing.
Clear access to the firebox and, if we’ll be going up, to the attic or crawl space, and don’t burn a fire in the 24 hours before we arrive. Remove any ashes from the firebox so we can see the damper and the firebrick clearly. If you have paperwork from a prior inspection or repair, have it ready; it helps us understand the chimney’s history and match the level of inspection to what’s already known. For residents comparing options across neighborhoods, our chimney inspection page covers Kensington.
Schedule Your Chimney Inspection Service in Borough Park Today
An inspection is the cheapest way to find out whether your chimney is safe to use this season, and it’s the only way to get a straight answer on what’s actually inside the flue. Call (833) 554-1032 to book a documented assessment in Borough Park. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician to your door. The estimate is free and carries no obligation. The local pro is licensed and insured as the state requires.
Written by the team at Chimney Sweep Borough Park.