Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bensonhurst
If your chimney top is crumbling or the cap has rusted through, the fix starts with a look from the roof, not a sales pitch. We handle chimney cap and crown work on the attached brick rowhouses of Bensonhurst, where chimneys sit flush against the building next door and access is half the job. Our technicians have up to 9 years of experience reading exactly these stacks, and we tell you plainly when a crown can wait. Call (833) 554-1032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bensonhurst Homeowners Call Chimney Sweep Borough Park for Chimney Cap & Crown
Most of what goes wrong with a cap or crown in Bensonhurst goes wrong quietly. Brick spalls, mortar joints crumble, and meltwater finds its way down inside a chimney that was never lined for the way it gets used today. We work on these rowhouse stacks often enough that we know where to look first, and we don’t recommend a dollar of masonry until you’ve seen the camera footage yourself.
Our inspection-first discipline is the whole point. A cap or a crown is a small piece of a bigger system, and we quote it only after scoping the flue and photographing the top from the roof. Trade-grade materials are non-negotiable for us: HeatShield for liner resurfacing, Gelco and Olympia Chimney for caps and liners, Famco where it fits the stack. One crew carries the job from the flue to the firebox, with no handoff to a second contractor. Our technicians have up to 9 years of experience, and they’ll tell you when a crown coating is enough and when it isn’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bensonhurst
Cap and crown work on a Bensonhurst rowhouse isn’t the same as on a detached house with a straight-up climb. Here the chimney often abuts the neighbor’s roof, so we plan access carefully and keep the party wall clear.
Cap Installation in Bensonhurst
A properly sized cap keeps rain, birds, and squirrels out of an open flue, and it does it without choking draft. On Bensonhurst stacks that carry more than one flue, sizing matters more than the cap itself. We measure the actual openings before anything is ordered.

Cap Replacement in Bensonhurst
Rusted-through or missing caps are common on the older rowhouse stock. We pull the old one, inspect the crown underneath, and set a new cap sized to the flue. If the crown is already failing where the cap meets the masonry, you’ll see it in the photos before we quote.

Crown Repair in Bensonhurst
The crown is the concrete or mortar cap on top of the chimney that sheds water away from the brick. When it cracks, meltwater gets into the stack. We repair cracked and washed-out crowns, and we rebuild where the damage has gone deeper than a patch can hold.

Crown Coating in Bensonhurst
A poured crown coating restores a crown that’s still structurally sound but has lost its surface. It’s often the right call on early-20th-century rowhouses where the original crown is spalling but the masonry below is holding. We only recommend it when the crown can actually take it.
Trusted Brands We Service in Bensonhurst
We install and work with recognized trade-grade brands: HeatShield, Gelco, Olympia Chimney, Famco, DuraFlex, and Copperfield. These are the same materials specified by certified chimney professionals nationwide, and using them matters most on multi-flue stacks where a generic cap won’t fit properly. We don’t claim to keep parts on hand; what we do is specify the right cap and liner for your stack and handle the install from start to finish. No second contractor, no runaround on who’s responsible for the flashing.
Common Chimney Cap & Crown Problems We See in Bensonhurst Homes
- Cracked crowns on early-20th-century brick. The original crown on a rowhouse stack cracks and lets meltwater seep into the masonry. The crack is often hidden right where the crown meets the shared party wall, so it doesn’t show from the ground.
- Single-flue caps on two-flue stacks. Plenty of Bensonhurst stacks still tie a fireplace flue and an old boiler flue together. A cap sized for one opening leaves the other uncovered and compromises draft on both.
- Salt-air mortar deterioration. Humidity off the coast speeds up spalling and mortar joint decay on exposed chimney tops. That’s why a cap replacement often gets quoted on a crown that’s already failing underneath.
- Rusted or missing caps letting water and animals in. An open flue takes rain straight down the stack and gives squirrels and birds a way in. A correctly sized cap closes that off without sacrificing draft.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Bensonhurst, NY
Here’s what cap and crown work typically runs in Bensonhurst. A single-flue cap installation usually falls around $250 to $450, and a multi-flue cap sized for a shared fireplace and boiler stack runs roughly $400 to $800. Crown repair on a hairline or washed-out crack is typically $350 to $700, while a poured crown coating runs about $600 to $1,100. A full crown rebuild, where the damage has gone into the masonry, starts around $1,200 and climbs with the size of the stack. What moves the number is access (ladder work from an adjoining roof costs more than a straight climb), the number of flues, and whether the crown takes a repair or needs replacing. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Bensonhurst
We work the rowhouse blocks across this part of Brooklyn, including Bensonhurst and the surrounding neighborhoods. If you’re in Gravesend, Dyker Heights, Midwood, or Borough Park, we cover the same kind of attached brick stacks and shared party walls. Same inspection-first approach, same camera evidence before anything is quoted. Call (833) 554-1032 to book a visit.
Serving Bensonhurst, NY – Our Local Coverage Area
We serve Bensonhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bensonhurst
Yes, a multi-flue cap covers both openings as long as it’s measured to fit the whole stack, not just one flue. We scope each opening separately and confirm the cap clears both before quoting, since a cap sized for a single flue will leave one opening exposed and hurt draft. Call (833) 554-1032 for an exact quote – estimates are free.
Coating is enough when the crown is still structurally sound and only the surface has spalled; rebuilding is the answer when the damage has gone into the masonry underneath. The camera footage from the roof tells us which one you’re looking at, and you see it before we recommend anything. Call (833) 554-1032 and we’ll schedule an inspection so you can decide with the evidence in hand.
Often from a neighbor’s roof or yard, because the chimney sits flush against the adjoining building and there’s no straight-up climb. Clearance to the party wall shapes how we plan the access and how much cap overhang we can set. Call (833) 554-1032 to book a visit and we’ll walk you through what access your stack will need.
It matters, because the damage isn’t from burning, it’s from water. Every freeze-thaw cycle pushes meltwater into a cracked crown and into the masonry below, so an occasional-use fireplace still takes the same weather beating. Call (833) 554-1032 for an exact quote – estimates are free, and we’ll tell you honestly if the crown can safely wait.
First-degree creosote is a light, flaky soot a standard brush clears; glaze-stage creosote is a hard, tar-like layer bonded to the flue that a brush won’t remove. Glaze calls for HeatShield resurfacing or relining, which is why we scope the flue before quoting a crown, since a failing crown often sits above a flue that needs work too. Call (833) 554-1032 for an exact quote – estimates are free.
Get Your Bensonhurst Chimney Assessed
Cap and crown work is a straightforward fix once you know what you’re looking at. What we won’t do is tell you a crown needs rebuilding before you’ve seen the roof photos, or sell you a cap that doesn’t fit your stack. If you’re in Bensonhurst and want an honest read on the top of your chimney, call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. For the full scope of what we handle, see our chimney cap & crown service page.
Written by the team at Chimney Sweep Borough Park.