Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Borough Park
Borough Park roofs are close together, and so are the chimneys on them. On the rowhouse blocks off 13th Avenue and along the side streets near 50th Street, a crown that has cracked or a flue left open isn’t only your problem – it can reach the flue next door. We install and repair caps and crowns built for that kind of dense housing, sized to the stack you actually have, not a one-size cap dropped on top.
Our technicians have up to 9 years of experience, and we work with trade-grade brands like Gelco, Olympia Chimney and Copperfield. Call (833) 554-1032 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Borough Park Homeowners Call Chimney Sweep Borough Park for Chimney Cap & Crown
Borough Park has a particular kind of chimney stock: early-20th-century brick stacks with original clay tile liners, many of them now shared between units or undersized for the gas and oil appliances hooked up to them. That’s a different job from a detached-house suburb, and we scope it that way. Before we quote a cap or a crown, we look at how the flues are arranged inside the stack and whether a neighbor’s appliance is venting into the same masonry.
Our reputation in Borough Park rests on inspection first, recommendation second. Nothing gets quoted without evidence you can see – photos from the roof, notes on what the crown edge looks like, and a clear read on whether the flues are cross-contaminating. If the crown can safely wait a season, we tell you so. From the flue to the firebox, one crew handles the whole scope, so there’s no handoff to a second contractor when masonry meets liner work.
Response time to Borough Park is quick because the neighborhood is compact – the rowhouses between Fort Hamilton Parkway and McDonald Avenue are a short run, and the brick apartment buildings closer to New Utrecht Avenue are too. Our technicians have up to 9 years of experience, and we bring the same documented approach to every address, whether it’s a two-family rowhouse or a six-unit walk-up. Call (833) 554-1032 to book.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Borough Park
Cap Installation
A properly sized cap keeps nor’easter rain and downdraft out of an open flue, and in Borough Park that matters more than in open suburbs because the rooflines sit so close. We install caps sized to the flue opening, not the nearest stock size, using Gelco and Olympia Chimney components. Where a stack serves more than one unit, we look at how a new cap on one flue affects airflow in the adjacent flues before we drill anything.

Multi-Flue Cap
On shared stacks, a single-flue cap can leave the neighboring flue exposed to rain driving sideways in a storm. We build multi-flue caps that cover the whole bank of flue openings under one housing, with individual screens so each flue keeps its own draft. This is the right answer for the attached rowhouses throughout Borough Park, where two or three flues often share the same brick stack.

Crown Repair
The crown is the concrete or mortar slab that sheds water off the top of the chimney. Freeze-thaw winters in Borough Park crack mortar joints and spall the brick at the crown edge, letting meltwater track down behind the brick and rust the damper below. We rebuild crowns with a proper slope and overhang so water leaves the masonry instead of soaking into it, and we repoint the brick at the base of the crown while we’re up there.

Crown Coating
When a crown is cracked but still structurally sound, a coating can seal it and buy years before a full rebuild is needed. The key is that the coating has to shed water and stay flexible through freeze-thaw cycles – rigid patches fail within a season or two. We use trade-grade materials and tell you plainly when a coating is enough and when the crown has gone too far for one.
Custom Cap
Older Borough Park stacks often have irregular flue dimensions – hand-built masonry from the 1910s and 1920s rarely matches today’s stock sizes. A custom cap is fabricated to the actual measurements of your stack, so it fits the shared flues and the masonry outline without gaps a driving rain can get through. We measure on site and specify the cap to those numbers.
All of this runs through one crew, start to finish. See the full scope on our chimney cap & crown page.
Trusted Brands We Service in Borough Park
We install and work with Gelco, Olympia Chimney, Famco and Copperfield components, and we use DuraFlex and HeatShield on the liner side when a cap or crown job turns into relining or resurfacing work. These are the brands specified by certified chimney professionals, not builder-grade substitutes, and we name them because you should know exactly what’s going up on your roof. We don’t claim to stock parts locally – we specify and order to the job, so turnaround is quick. If a custom cap is needed for an irregular stack, we fabricate to your measurements and install once it arrives.
Common Chimney Cap & Crown Problems We See in Borough Park Homes
- Shared flues in attached stacks. Borough Park rowhouses often interleave flues from neighboring units in the same masonry stack, so a cap that fails on one address can let water or downdraft reach a neighbor’s appliance venting. This is rare in detached-housing areas and common here.
- Freeze-thaw damage at the crown edge. New York’s humid summers and hard winters crack mortar joints and spall the brick where the crown meets the stack. Water tracks down behind the brick and rusts the damper below.
- Nor’easter rain into uncapped flues. Heavy storms drive rain sideways into open flues on the neighborhood’s early-20th-century brick chimneys, soaking the smoke chamber and firebox. A properly sized cap with screens keeps it out.
- Undersized clay tile liners in shared stacks. Original liners were built for older appliances. Modern gas and oil units can be oversized for them, and a new cap alone won’t fix cross-contamination between adjacent flues – liner evaluation comes up as often as capping here.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Borough Park, NY
Every job is priced by a written estimate after a roof inspection, and the estimate is free. Typical ranges in the Borough Park market:
- Single-flue cap installation: $180 to $380, depending on flue size and cap style.
- Multi-flue cap for a shared stack: $450 to $900, sized to the number of flues.
- Crown repair or rebuild: $400 to $1,200, depending on the crown area and the extent of brick repointing.
- Crown coating on a sound crown: $250 to $500.
- Custom-fabricated cap: $600 to $1,300, driven by the measurements of the stack.
Cost moves with access, the number of flues on the stack, and whether masonry repair is needed at the crown edge. The written estimate sets the final price. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Borough Park
We cover the neighborhoods around Borough Park as well – Sunset Park, Kensington, Dyker Heights and Bensonhurst are all within reach, and the housing stock is similar enough that the same shared-stack considerations usually apply. If you’re not sure whether your address falls inside the area we serve, call (833) 554-1032 and we’ll confirm.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Borough Park
A cap on your flue protects your flue only. On a shared stack, the neighboring flue has its own opening, and a single-flue cap won’t cover it. The right fix is a multi-flue cap that covers the whole bank of openings under one housing with individual screens, so each flue keeps its own draft and rain stays out of both. Before quoting, we inspect the stack to check that the adjacent flues aren’t already cross-contaminating from a neighbor’s appliance. Call (833) 554-1032 for a free estimate.
Freeze-thaw cycles crack mortar joints and spall the brick at the crown edge, then meltwater seeps behind the brick and rusts the damper below. New York’s humid summers and cold winters push that cycle hard, and the crown is where it hits first. A rebuild with a proper slope and overhang, or a coating on a sound crown, sheds water off the masonry instead of letting it soak in. Call (833) 554-1032 to book a free estimate.
In most cases, yes. A cap is installed from a proper roof ladder or staging set on the roof itself, without full scaffolding, even on tight rowhouse blocks. Access depends on the roof pitch and the height of the stack above the roofline, which we check during the estimate. We do the work safely and won’t take shortcuts on a steep or high stack. Call (833) 554-1032 for a free estimate.
A custom cap is necessary when the flue openings don’t match standard stock sizes, which is common on hand-built masonry stacks from the early 1900s. A stock cap that leaves gaps lets driving rain in, and it can shift in wind. A custom cap is fabricated to your actual measurements, so it fits the flues and the masonry outline. We measure on site and specify to those numbers. Call (833) 554-1032 for a free estimate.
Not always. A Level 1 inspection is usually enough for a routine cap or crown job on a chimney with no known problems. A Level 2 inspection comes into play when the flues are shared between units, when a change of appliance or liner is planned, or when we see evidence of cross-contamination. We recommend the level that fits the job, not the biggest one. Call (833) 554-1032 for a free estimate.
Book Your Chimney Cap & Crown in Borough Park
Dense rowhouses, shared stacks and a pre-Passover crunch that books out faster than any fall heating-season slot – that’s the Borough Park chimney market. Whether you’re on a side street near 13th Avenue or in a brick walk-up closer to New Utrecht Avenue, we inspect first, recommend only what the evidence supports, and handle cap, crown and masonry work with one crew. Trade-grade materials, properly installed, built to last the season and the next. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Borough Park.