Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Crown Heights
If you own a rowhouse or brownstone in Crown Heights, your chimney cap and crown are doing quiet, constant work against water, wind and time. We help Crown Heights homeowners replace failed caps, repair softened crowns and put a stop to shared-stack smoke problems before heating season turns them into a real headache. Our technicians have up to 9 years of experience, and we know these 1890s – 1920s attached houses as well as any address on a typical block. Call (833) 554-1032. We answer 24/7.
Why Crown Heights Homeowners Call Chimney Sweep Borough Park for Chimney Cap & Crown
Crown Heights is not a place where you can treat one roof in isolation. The dense rows of attached brownstones between Eastern Parkway and the side streets toward East Flatbush mean chimneys are frequently shared or abutting structures, and a failed crown on one address can push water and downdraft smoke into the flue next door. We work as a dedicated chimney specialist, not a general handyman who sweeps on the side, and we treat shared-stack coordination as part of the job, not an awkward phone call the homeowner has to make alone.
We lead with inspection first, recommendation second. Before anyone quotes a cap or a crown, the stack gets looked at properly, documented, and explained, and you get to see what the camera sees. Our technicians have up to 9 years of experience, and we work exclusively with trade-grade brands like Gelco, Olympia Chimney and Copperfield so the cap you pay for is built to last the season and the next. When you call, you get a straight answer about what the chimney actually needs.
Fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to a Crown Heights address quickly, and if you call outside dispatch hours it is booked into the next opening. The estimate is free and the price is set per job by the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Crown Heights
From the flue to the firebox, cap and crown work is where most Crown Heights water intrusion begins. Here is what we handle on these old rowhouse stacks.
Cap Installation
A new cap keeps rain, birds and downdraft out of a live or abandoned flue. On Crown Heights brownstones, the original chimney footprint is rarely a clean square, so we measure the actual stack before fitting anything. Gelco and Copperfield caps hold up against the coastal-adjacent humidity that softens cheap mortar fast.

Cap Replacement
Many Crown Heights caps were fitted decades ago and are rusted, loose or the wrong size for a multi-flue stack. A correct replacement stops the cycle of water running down an unlined coal-era flue and into the adjoining house’s shared stack. We confirm what the flue actually serves before recommending a replacement.

Crown Repair
The crown is the concrete or mortar cap on top of the stack, and in Crown Heights the freeze-thaw cycle has been cracking and shedding these crowns for over a century. A spalled crown lets water down between the flue and the brick. We rebuild the crown with proper flashing and a slope that sheds water away from the party-wall joint.

Crown Coating
When the crown has hairline cracks but the mortar is still sound, a HeatShield-style coating can seal it without a full rebuild. We tell you plainly whether coating will do the job or whether the crown has softened too far and needs replacement. Coating a failing crown just delays the leak into heating season.
Trusted Brands We Service in Crown Heights
We install and work with recognized trade-grade brands: Gelco and Copperfield for caps, Olympia Chimney for multi-flue and custom cap fit, Famco and HeatShield for crown and liner restoration. We don’t claim local parts stock, and we don’t pretend to. What we do is specify the right product for the stack in front of us, order it, and dispatch a technician who knows how it goes on. That keeps turnaround predictable on a tight Crown Heights roof.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Crown Heights Homes
These are the patterns that show up again and again on the attached brownstone rows.
- Softened crown mortar after 100+ years of freeze-thaw. The mortar cracks and sheds, letting rain down into a flue that may also serve the abutting house’s stack. Once water is inside, the fix is no longer just a cap.
- Uncapped, unlined coal-era flues abandoned when buildings went gas. An open flue lets rain, animals and downdraft smoke migrate into a neighbour’s live flue through the shared party-wall chimney. Capping an abandoned flue protects more than your own address.
- Wrong-sized or single-flue caps on a multi-flue stack. An undersized cap chokes draft and traps creosote, which makes smoke spillover worse on windy Crown Heights heating-season days. A multi-flue or custom cap sized to the original footprint is the correct fix.
- Cross-ventilation complaints that only show up when the heat comes on. A first-floor stove flue tied into a stack that also vents a second-floor gas boiler is a classic pattern in these subdivided buildings, and the symptom appears in October, not July.
Pricing for Chimney Cap & Crown in Crown Heights, NY
Cap and crown pricing in Crown Heights runs a little higher than in areas with less shared-stack complexity, because the work often involves coordinating a party-wall joint and sizing a custom cap to an original footprint. A typical single-flue cap installation in Crown Heights runs $250 – $550. A multi-flue or custom cap sized to a brownstone stack runs $450 – $1,100. Crown repair, where the softened mortar is chipped back and rebuilt with proper slope and flashing, runs $350 – $900. Crown coating for hairline cracks on sound mortar runs $200 – $450. What moves the number is the size of the stack, whether it is shared, and how much of the crown has actually failed. The estimate is free and the written estimate sets the final price. Call (833) 554-1032 for an exact quote.
We Also Serve Cities Near Crown Heights
The same shared-stack and aging-masonry conditions extend into the neighboring areas we cover, including East Flatbush, Flatbush, Park Slope and Kensington. If you’re just outside Crown Heights, we’re glad to book a sweep and crown inspection at your address. Reach out to our Crown Heights team’s wider coverage area when you call.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Crown Heights
Responsibility typically sits with whichever owner’s flue the cap or crown serves, but on a structurally shared party-wall stack the repair is often a joint issue. In Crown Heights’s attached brownstones, a crown failure at one address can leak into the neighbor’s flue through the shared stack, so the practical answer is to talk to the abutting owner before work begins. We can inspect and document the shared condition so both sides have the same facts. Call (833) 554-1032 for an exact quote – estimates are free.
Smoke entering your apartment when the neighbor’s heat fires up usually means a cross-connected or shared flue, or straight downdraft through an uncapped stack. In Crown Heights’s subdivided brownstones, a first-floor stove flue tied into a stack that also vents a second-floor boiler is a common pattern, and the symptom only shows when the heat is on. A Level 2 inspection confirms which flue serves what. Call (833) 554-1032 for an exact quote – estimates are free.
If the crown has hairline cracks but the mortar is still sound, a coating will seal it; if the mortar has softened and is shedding, the crown needs a full repair. In Crown Heights’s freeze-thaw climate, softened mortar from a century of cycles usually means repair, not coating. We tell you which one based on what we see, and we show you the evidence before recommending. Call (833) 554-1032 for an exact quote – estimates are free.
Yes. A capped, abandoned flue still needs an annual inspection, because caps fail and water finds a way in. In Crown Heights, an uncapped coal-era flue left open can drop water and downdraft smoke into a neighbor’s live flue through the shared stack, so capping and checking the cap matters beyond your own address. Call (833) 554-1032 for an exact quote – estimates are free.
Yes. A multi-flue cap can be sized to the original chimney footprint so it covers every flue without a bulky, mismatched silhouette. On Crown Heights brownstones, the original stack is rarely square, so we measure the actual brick before ordering a custom or multi-flue cap. The result protects the whole stack and still reads as the building it was. Call (833) 554-1032 for an exact quote – estimates are free.
Written by the team at Chimney Sweep Borough Park.