Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Sunset Park
If you’re looking at a crumbled crown or a cap that’s gone missing on top of a Sunset Park rowhouse, we handle that work from the first inspection to the final mortar finish. We know these blocks: the attached late-19th and early-20th century buildings that run up through 11220, the party-wall stacks that serve more than one address, the old coal-era flues that were never properly relined. Caps and crowns here need to fit the building and the shared stack, not a one-size-fits-all catalog part. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Why Sunset Park Homeowners Call Chimney Sweep Borough Park for Chimney Cap & Crown
We’re a chimney specialist, not a general contractor who tacks sweeping onto the end of a renovation list. From the flue to the firebox, we cover sweeping, inspection, cap and crown work, chimney repair and fireplace repair ourselves. One crew, start to finish, with no handoff to a second contractor halfway through a job on your roof.
That matters more in Sunset Park than in most places, because the roofs here are crowded with shared stacks and the work has to be done precisely, in coordination with the building next door. Our technicians have up to 9 years of experience, and every job starts with inspection first, recommendation second. We work with trade-grade brands like Copperfield, Olympia Chimney and HeatShield, so you know exactly what’s going on top of your building and inside the flue. If you’re looking for a dependable specialist to keep your chimney safe and code-compliant season after season, that’s the work we do across Sunset Park. Call (833) 554-1032.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Sunset Park
Caps and crowns fail for different reasons here. The crown takes the weather; the cap takes the birds, rain and downdrafts. We treat them as separate jobs with separate evidence, and we’ll tell you plainly when one can wait. You can read more about the full scope on our chimney cap & crown page.
Cap Installation in Sunset Park
A proper cap keeps rain, squirrels and birds out of a flue that runs straight down into your living space. On Sunset Park rowhouses we size the cap to the actual flue opening and to the shared stack, then anchor it so harbor winds don’t shift it through the seasons. Custom fabrication is often the only fit on these old irregular clay liners.

Cap Replacement in Sunset Park
Humid summers and wind-driven rain off the harbor speed up rust on galvanized and cast-iron caps, and many of the caps on these blocks are decades past their service life. If your cap is corroded, bent or simply gone, replacement usually resolves the draft and animal problems at the same time. We show you the condition on the roof before we quote anything.

Crown Repair in Sunset Park
The mortar crown is where freeze-thaw cycles do their worst work. Water gets into hairline cracks, freezes overnight, expands and spalls the brick and the crown itself. We rebuild and re-slope crowns on Sunset Park buildings so water sheds away from the flue instead of into it, using mortar matched to the original brick. For larger multi-flue stacks, we may recommend a flexible coating built for that purpose.

Crown Coating in Sunset Park
Where the crown is still structurally sound but the surface is breaking down, a protective coating can buy years of service at far less than a rebuild. On these century-old brick stacks, the coating has to be compatible with the original masonry or it traps moisture and makes the problem worse. We’ll tell you which situation yours is, with photos.
Trusted Brands We Service in Sunset Park
We install and work with recognized trade-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. These are the same materials specified by certified chimney professionals nationwide, which means the caps, coatings and liners going onto your Sunset Park building are the products the trade actually trusts. We don’t claim to keep parts in stock; we source and schedule the right components for your job and get it done with a fast turnaround. If you want to know exactly what’s going on your chimney before it goes on, ask. We’ll tell you.
Common Chimney Cap & Crown Problems We See in Sunset Park Homes
- Crown spalling from freeze-thaw cycles off the harbor. Water settles into small cracks, freezes overnight and pushes mortar and brick apart, exposing the joints underneath. Left alone, this is the path water takes straight into the flue.
- Cap and hardware corrosion from humid summers and wind-driven rain. The old cast-iron dampers and stovepipe connectors common in these flues rust faster than the same parts do inland. A missing cap lets animals in and turns a small draft problem into a real one.
- Cross-drafting between adjacent units through shared party-wall flues. A smoke test on a windy day will show it. Smoke spills into one apartment while another vents fine, and no single-home inspection catches it because the flue isn’t a single home’s flue.
- Appliances vented into stacks never designed for them. Many of these coal-era flues now serve oil boilers or gas appliances that demand more than the original brick shaft can reliably deliver. That mismatch is a venting problem, not just a cleaning problem.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Sunset Park, NY
Typical estimates here: a single-flue cap installation runs about $250 to $500, a custom-fabricated cap for an irregular or oversize flue runs $450 to $900, crown repair on a standard stack runs $400 to $900, and a protective crown coating runs $200 to $450. Multi-flue caps for shared stacks in these buildings sit at the upper end because there’s more to size and anchor. What moves the number: the number of flues, access to the roof, the condition of the brick under the crown, and whether the neighbor’s flue is on the same stack. The written estimate sets the final price, and the estimate itself is free. On many Sunset Park blocks the practical question isn’t only cost, it’s coordination.
A Note on Shared Stacks and Party-Wall Flues
This is the part most single-home inspections miss. On many Sunset Park blocks the chimney shafts run up through the party walls between attached buildings, so a technician called for one address often finds the flue serving the neighbor’s boiler too. A cap or crown job on one rowhouse can require coordinating with the neighboring unit’s flue, and a smoke test on a windy day is the only reliable way to expose cross-drafting that a single-home walkthrough never would. That’s exactly why we start with a Level 2 inspection and camera evidence. Nothing gets recommended here that you can’t see for yourself on the screen, and we’ll say plainly when a crown or a cap can safely wait another season.
A typical job on these blocks goes like this: a homeowner notices mortar crumbs on the roof and a drafty smell near the firebox after winter. A qualified technician usually finds a spalled brick crown and a missing or rusted cap. After a Level 2 inspection, the recommendation may be a custom multi-flue cap sized for the shared stack, plus crown repair using a flexible mortar compatible with the original brick. That’s a general picture, not any one customer’s job. It’s just how this work goes on century-old attached buildings.
We Also Serve Cities Near Sunset Park
We serve homeowners in Borough Park, Kensington, Bay Ridge and Dyker Heights, and the same cap, crown and masonry crews that work in Sunset Park cover those neighborhoods too. The buildings change block by block, but the standards don’t. Call (833) 554-1032 for a free estimate wherever you are.
Serving Sunset Park, NY – Our Local Coverage Area
We serve Sunset Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Sunset Park
Because on many Sunset Park blocks the chimney shafts run up through the party walls, a shared flue can serve the neighbor’s boiler as well as your own appliance. Any cap or crown work on that stack has to account for what’s venting into it, or you fix your side and leave the cross-drafting in place. We inspect the whole stack, not just your half. Call (833) 554-1032 for a free estimate.
Look for mortar crumbs on the roof, cracks across the top of the crown, or a crown that no longer slopes away from the flue. Those are the visible signs that freeze-thaw cycles have started opening the masonry. The only way to be sure is a proper inspection with photos. Call (833) 554-1032 and we’ll book one.
Often yes. Old clay liners on these buildings are rarely uniform, and a shared multi-unit stack usually has more than one flue opening of a different size. A custom-fabricated cap fits the actual openings and anchors securely to the crown. A stock cap that doesn’t fit leaves gaps that defeat the purpose. Call (833) 554-1032 for a free estimate.
You should see the condition itself, on camera, before any work is recommended. We do a Level 2 inspection and show you the photos and video of the crown, the cap and the flue interior. If the crown is sound and the cap only needs replacement, that’s what we’ll tell you. If work can safely wait, we’ll say so. Call (833) 554-1032 to schedule.
Sometimes, yes. A missing or badly fitted cap lets wind-driven rain and downdrafts into the flue, which shows up as smoke spillage at the firebox. A properly sized cap cuts the downdraft. But if the draft problem comes from cross-drafting through a shared party-wall flue, the cap alone won’t solve it, and that’s where a smoke test matters. Call (833) 554-1032 and we’ll sort out which one you have.
Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Caps, crowns, masonry and flue work across Sunset Park, handled by one crew from start to finish, with camera evidence you can see before anything is recommended.
Written by the team at Chimney Sweep Borough Park.