Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Park Slope, NY
We provide independent DuraFlex service across Park Slope, and the one thing that makes our work here different is this: most calls that start as a cleaning end as a lining conversation. In a neighborhood built almost entirely of 1880s to 1910s brownstones and brick rowhouses, a DuraFlex liner often sits inside a flue that was never designed for it, in a stack that may be shared with the neighbor through a party wall. We are an independent DuraFlex service provider, not affiliated with or authorized by the manufacturer. What we bring is a Level 2 Inspection first, then creosote removal and cap installation that actually fit the system you have. Call (833) 554-1032.
Why Park Slope Residents Choose Us for DuraFlex Service
DuraFlex is one of the relining solutions specified most often for historic rowhouses, and we’ve spent enough time inside these liners to know their habits. Corrosion shows up first at the joints. Insulation wrap loosens at the top where water has been getting in. Brushes and the occasional animal leave their marks in flues that were lined after the fact.
We’re a chimney specialist, not a general contractor who adds sweeping to the menu. The full arc runs through one crew: sweeping, Level 2 Inspection, cap and crown work, chimney repair, fireplace repair, and full relining with DuraFlex flexible liner systems. Trade-grade materials only – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Parts are chosen to fit the liner that’s already there, not to upsell you a replacement. Our technicians have up to 9 years of experience. When you call, we quote the work, agree the price in writing, and book it. No guessing at the door.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Park Slope
These are the failure modes we look for on a first inspection in Park Slope, and each one has a local cause behind it.
- Joint corrosion from coastal air and freeze-thaw. Park Slope’s humid coastal climate and hard winter cycles work on stainless at the seams, where moisture sits longest. What looks like surface discoloration from below is often pitting that has started to open the joint.
- Degraded insulation wrap under a failing crown. Water intrusion at the chimney top soaks the insulation, and a wet wrap loses the draft and efficiency it was there to protect. Spalling brick and cracked mortar crowns are the usual first sign, and they’re common on these older stacks.
- Mechanical damage in retrofitted flues. Unlined brick flues that were later fitted with a DuraFlex liner sometimes carry scoring and abrasion from decades of sweeping brushes, plus nesting debris from animals that found the flue before the liner did.
- Poor sizing in shared party-wall stacks. A liner sized for the wrong appliance, or two appliances sharing draft through one stack, causes weak draft and premature wear. In a rowhouse where the boiler and water heater flues run through the same chimney as the fireplace, this shows up fast.
- Creosote that has bonded to the liner wall. Wood-burning parlors that get heavy seasonal use build glazed creosote, and it doesn’t come off with a standard pass. Removing it without scoring the stainless takes the right tools and patience.
DuraFlex Service in Park Slope: What Local Conditions Mean for Your Equipment
Park Slope’s climate is the whole story for a DuraFlex liner. Humid coastal summers and freeze-thaw winters attack a chimney from the top down, and the damage almost never announces itself from the firebox. Spalling brick, cracked mortar crowns, and water intrusion at the chimney top are discovered during a sweep before heating season, not after – which is exactly why we inspect before we clean. What that means for a DuraFlex owner is specific: the stainless at the top of the liner is the first to corrode, because it takes the weather, and the insulation wrap just below the crown is the first to lose its performance when water gets in. A sweep that only goes after soot misses both. On a terraced block near Prospect Park West, that top-down inspection is often the most valuable part of the visit, because by the time corrosion or a wet wrap shows up at the firebox, the fix has grown.
DuraFlex Models & Products We Service in Park Slope
We service the kinds of DuraFlex products that end up in Park Slope’s rowhouse chimneys: the DuraFlex Stainless Steel Liner in the common 316L or 304L alloy, the DuraFlex Insulated Liner Kit, the DuraFlex Flexi-Liner for wood and gas flues, and the DuraFlex Clay Tile Conversion Kit used when an old clay-tile flue gets relined. We are not a DuraFlex dealer and we don’t carry the manufacturer’s line – we repair, install, and service these systems with quality parts that fit. We use OEM DuraFlex components when available so compatibility holds, and quality aftermarket parts for accessories like caps and dampers. If the liner is structurally sound and only a minor component has failed, we say so and repair it. Replacement is a recommendation we make only when the evidence says it’s time.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Park Slope
Pricing is set per job by a written estimate, and the estimate is free. What drives the number: the flue configuration, how much creosote needs removing, whether the liner requires a top-section repair, and how the crown and cap are holding up. On a shared stack, the scope may need to be discussed with both owners before anything is priced.
| Service | What’s involved | How pricing works |
|---|---|---|
| Chimney sweep + Level 2 Inspection | Creosote removal, camera inspection, photo report | Per job, quoted before booking |
| Creosote removal (heavy or glazed) | Bonded deposits removed without scoring stainless | Per job, based on severity |
| Cap installation | Cap fitted to liner and crown; LPC-approved design where required | Per job, set by estimate |
| Liner top-section repair | Corroded section, joint, or insulation wrap addressed | Per job, set by estimate |
Nothing gets recommended without camera evidence you can see for yourself. Call (833) 554-1032 for an exact quote – estimates are free.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Park Slope
Yes. Park Slope’s humid coastal air and freeze-thaw winters put the top of your liner under more stress than the rest of it, so the crown and cap matter as much as the sweep. We pay specific attention to joint corrosion and insulation wrap condition during a Level 2 Inspection. Call (833) 554-1032 to book an inspection.
Not always. Most of Park Slope falls inside the Park Slope Historic District, and exterior modifications – including chimney caps – can require Landmarks Preservation Commission approval, so the cap must use approved materials and designs to avoid violations. We’ll walk you through what your cap needs before any work is booked.
Call us before either owner commits to anything. Shared party-wall stacks are common in these rowhouses, and a flue problem or rebuild can involve two owners, so both sides need the same inspection findings. We document what we see with photos so the conversation between neighbors starts from evidence.
A Level 2 Inspection tells you. Improper sizing shows up as weak draft, smoke spill, and premature wear – especially in shared stacks where the boiler and water heater flues run alongside the fireplace flue. We check the liner against the appliance, not against a generic chart.
Yes. Stainless surfaces can be scored by aggressive tools, so glazed deposits get removed with more care than they would off clay tile. Bonded creosote that’s left in place is a chimney fire risk, which is why we don’t skip it. Call (833) 554-1032 for a quote.
Service Areas Near Park Slope
We also serve homeowners in Borough Park, Sunset Park, Kensington, Dyker Heights, Bensonhurst, and Midwood. If your DuraFlex liner is in a rowhouse or brownstone nearby, the same inspection-first approach applies. For work in adjacent neighborhoods, see our Carroll Gardens and Red Hook pages – both share Park Slope’s historic masonry and coastal exposure.
Book Your DuraFlex Service in Park Slope Today
Whether you need a sweep, a Level 2 Inspection, a cap, or a top-section repair on your DuraFlex liner, we start with the camera and the evidence. DuraFlex systems get the same trade-grade parts and careful sizing as everything else we service. Call (833) 554-1032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about our Park Slope service area.
Written by the team at Chimney Sweep Borough Park.